A-Tech Supermicro Certified 16GB DDR4 3200MHz CL22 ECC Registered 2Rx8 288-Pin Server RAM
16 GB DDR4 3200 MHz ECC registered server memory with CL22 latency and 2Rx8 dual-rank organisation
- Total capacity16 GB
- Rated speedDDR4 3200 (PC4 25600)
- ChipsetMajor Brand Chipset
- CAS latencyCL22
- Rated voltage1.2 V
- Buffer typeRegistered
- Supermicro certified for guaranteed server compatibility
- 16GB DDR4 3200MHz CL22 boosts multitasking throughput
- ECC registered 2Rx8 design protects data integrity
- Hynix major-brand chips ensure dependable operation
- 2V standard voltage reduces power draw
Supermicro Certified Server Memory
This 16GB DDR4 module carries Supermicro certification and is built for servers and workstations that require registered ECC memory. It suits administrators expanding capacity in qualified Supermicro platforms or replacing failed DIMMs with a validated part.
Registered ECC RDIMM with 288-pin interface
The module uses a registered design that places a register between the DRAM and the memory controller, reducing electrical load on the bus. Its 288-pin RDIMM form factor fits standard DDR4 server slots, and the dual-rank 2Rx8 organisation supports higher densities per channel.
3200MHz CL22 at 1.20V decides fit
The DIMM runs at PC4-25600 speed with a CAS latency of 22 and operates at the standard 1.20V DDR4 voltage. Systems must support DDR4 3200 registered ECC memory at this latency; platforms limited to lower speeds or unbuffered DIMMs cannot use this module.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $118.99
- Cheaper than about 62% of the 6,523 comparable items (median $188.99).
- Total capacity 16 GB
- Lower than about 60% of the 6,064 comparable items (median 32 GB).
- Price per GB $7.44 per GB
- Typical for this category: the median of 6,064 items is $7.25 per GB.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR416LD-ER32 |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
Questions about this item
What speed and form factor does this DDR4 RDIMM use?
The module runs at 3200 MHz as PC4-25600 in a 288-pin RDIMM form factor with CL22 latency and 1.20 V operation.
What physical slot and keying does this 288-pin RDIMM require?
It fits a standard DDR4 288-pin RDIMM slot; the registered design and ECC function only work on platforms that support registered ECC memory.
How is the module installed and what step is often missed?
Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, then verify in BIOS that ECC and registered mode are active.
More in ECC Server RAM
Similar items
Brute Networks Dell Compatible AA951241 16GB DDR4-2666 ECC Registered 2Rx8 1.2V 288-Pin server RAM
- 16 GB
- DDR4 2666
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Brute Networks 16GB DDR4-2933 1Rx4 Registered ECC server RAM
- 16 GB
- DDR4 2933
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Brute Networks HPE P03048-091 8GB DDR4-2933 1Rx8 Registered ECC server RAM
- 8 GB
- DDR4 2933





