A-Tech Supermicro Certified 4GB DDR3 1333MHz ECC Registered RDIMM 240-Pin Server RAM
4 GB DDR3 1333 MHz ECC registered RDIMM with Samsung chips, Supermicro certified for server reliability
- Total capacity4 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetSamsung Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- Supermicro certified for validated server compatibility
- Samsung DDR3 chipset ensures reliable data integrity
- ECC registered design prevents memory errors
- 5V standard voltage for efficient operation
- 1333MHz CL9 speed supports demanding workloads
Certified Supermicro DDR3 RDIMM
This 4 GB DDR3-1333 registered ECC module carries Supermicro certification and uses Samsung chips. It runs at 1.50 V with CL9 latency and fits 240-pin RDIMM slots. The single-rank 1Rx4 layout is validated for compatible Supermicro servers and workstations.
Suited for qualified Supermicro platforms
Administrators expanding or replacing memory in systems qualified for MEM-DR340L-SL08-ER13 can install this part with confidence. Builders whose motherboards require unbuffered UDIMMs, different voltages, or higher speeds must select memory that matches those specifications.
240-pin RDIMM form factor
The module only works in 240-pin registered DIMM slots that support DDR3-1333 ECC registered memory. Systems with UDIMM-only slots, different pin counts, or incompatible chipset requirements will not accept this part.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 97% of the 6,523 comparable items (median $188.99).
- Total capacity 4 GB
- Lower than about 95% of the 6,064 comparable items (median 32 GB).
- Price per GB $3.75 per GB
- Cheaper than about 83% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR340L-SL08-ER13 |
| Total capacity | 4 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Samsung Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Will this 240-pin RDIMM fit my Supermicro motherboard's DDR3 slots?
The module is a 240-pin DDR3 RDIMM built to the PC3-10600 standard, so it fits any DDR3 registered DIMM slot that accepts 1.5 V modules.
What is the correct way to seat this registered ECC module, and what step do people often miss?
Align the notch with the slot key, press firmly until both side clips click, then verify in BIOS that the system reports 1333 MHz and ECC active.
When should I plan to replace this 4 GB Samsung DDR3 module?
Replace it if the server logs uncorrectable ECC errors or if a memory diagnostic shows persistent faults on the module.
More in ECC Server RAM
Similar items
A-Tech 8GB DDR3 1333 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM
- 8 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
A-Tech 4GB DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM
- 4 GB
- DDR3 1600
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600





