A-Tech Supermicro Certified 8GB DDR3 1333MHz ECC RDIMM 2Rx4 Server Memory
Supermicro-certified 8 GB DDR3 1333 MHz ECC registered DIMM with dual-rank Hynix chips and 240-pin form factor
- Total capacity8 GB
- Rated speedDDR3 1333 (PC3 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.5 V
- Buffer typeRegistered
- Supermicro certified for guaranteed server compatibility
- 8GB DDR3 1333MHz ECC RDIMM for data integrity
- Dual-rank 2Rx4 architecture maximises memory density
- 5V standard voltage ensures efficient operation
- Rigorously tested with lifetime warranty backing
Supermicro Certified 8GB DDR3 RDIMM
This module is built for servers and workstations that require registered ECC memory. It targets system builders and IT professionals who need validated compatibility with Supermicro platforms. The 8GB capacity suits memory upgrades or replacements in multi-slot configurations.
Thermals noise and power draw
Operating at the standard DDR3 voltage of 1.50V, the module runs within typical server thermal envelopes. Registered buffering adds minimal electrical load to the memory controller. Passive cooling in a chassis with adequate airflow is sufficient for normal operation.
ECC Registered 2Rx4 DDR3 1333MHz
The dual-rank 2Rx4 organisation and CL9 latency at 1333MHz define the module's electrical behaviour. Only systems that support DDR3 registered ECC DIMMs at this speed can use it. Buyers needing unbuffered non-ECC memory or a different DDR generation cannot install this part.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $33.99
- Cheaper than about 89% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $4.25 per GB
- Cheaper than about 79% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-HL01-ER13 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
How do I install the 240-pin DDR3 RDIMM and what step is often missed?
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 8GB module registers at 1333 MHz with ECC active.
What maintenance or replacement will this 8GB DDR3 ECC RDIMM need over time?
No scheduled maintenance is needed; keep air vents clear so the 1.50V modules stay cool, and replace the stick only if system logs report uncorrectable ECC errors or the server fails to POST with the module seated.
What limit appears first when this 1333 MHz registered memory runs under sustained load?
The 1333 MHz data rate and CL9 latency set the throughput ceiling, so sustained workloads will hit bandwidth limits before the 1.50V power envelope becomes a constraint.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KVR13LR9D8/4HC 4GB DDR3 1333 ECC Registered Server RAM
- 4 GB
- DDR3 1333
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KVR800D2E6/2G 2GB DDR2 800 ECC server RAM
- 2 GB
- DDR2 800
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Kingston Technology Corp. KVR667D2D8F5/1GI 1GB DDR2 667 ECC Fully Buffered server RAM
- 1 GB
- DDR2 667





