A-Tech Supermicro Certified 8GB DDR3 1600 ECC Registered RDIMM 2Rx4
Server memory module adds 8 GB of DDR3-1600 ECC registered capacity with CL11 latency and 1.5 V operation
- Total capacity8 GB
- Rated speedDDR3 1600 (PC3 12800)
- ChipsetMajor Brand Chipset
- CAS latencyCL11
- Rated voltage1.5 V
- Buffer typeRegistered
- Supermicro certified for guaranteed server compatibility
- 8 GB DDR3 1600 MHz registered ECC module
- Dual-rank 2Rx4 organisation for higher density
- CL11 latency at standard 1.5 V operation
- 240-pin RDIMM form factor fits approved platforms
Certified server memory for Supermicro platforms
This 8 GB DDR3-1600 RDIMM carries Supermicro certification and uses Hynix chips in a 2Rx4 registered ECC layout. It targets administrators who need validated modules for compatible Supermicro servers and workstations. The module runs at standard 1.50 V with CL11 latency.
Registered ECC and dual-rank organisation
Error-correcting code and registered signalling protect data integrity in multi-module configurations. The 2Rx4 dual-rank design lets the memory controller address two logical ranks per module, increasing density per slot without changing the 240-pin form factor.
240-pin RDIMM build for rack-mount density
The registered DIMM format fits standard DDR3 server slots and presents a low-profile height suited to 1U and 2U chassis. Gold-plated edge contacts resist oxidation during long deployments. Buyers who need unbuffered UDIMMs or higher-capacity LRDIMMs should verify their platform requirements before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $15.99
- Cheaper than about 97% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $2.00 per GB
- Cheaper than about 93% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-HL02-ER16 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
Questions about this item
Will the 1.50V DDR3 RDIMM need any firmware updates or capacitor replacements over its service life?
No firmware or capacitor maintenance is required; the module is a solid-state DRAM DIMM validated at 1.50 V for the lifetime of the server.
What thermal or voltage ceiling limits sustained throughput on this CL11 1600 MHz registered module?
The JEDEC 1.50 V ceiling and the CL11 timing budget are the first limits reached under continuous full-bandwidth load.
How much extra heat and power does the 2Rx4 ECC registered stick add when the server runs 24/7?
At 1.50 V the 8 GB dual-rank RDIMM draws only a few watts, adding minimal heat to the chassis airflow.
More in ECC Server RAM
Similar items
HP 345113-551 1 GB DDR2 ECC Registered 400 MHz PC2-23200 CL3 DIMM
- DDR2 SDRAM
- ECC
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Simmtec, Inc 2GB PC3-10600U DDR3 server RAM MT8JTF25664AZ-1G4H1
- 2 GB
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc 4GB 1600MHz DDR3 PC3-12800 ECC Reg CL11 DIMM SR x8 Server Memory
- 4 GB
- 240-Pin DDR3 SDRAM





