A-Tech Supermicro Certified 8GB DDR3L 1333 2Rx4 RDIMM server RAM
8 GB DDR3L 1333 registered ECC module with 2Rx4 layout for Supermicro servers
- Total capacity8 GB
- Rated speedDDR3L 1333 (PC3L 10600)
- ChipsetMajor Brand Chipset
- CAS latencyCL9
- Rated voltage1.35 V
- Buffer typeRegistered
- Supermicro certified for guaranteed server compatibility
- Hynix 8 GB DDR3L module delivers reliable ECC registered performance
- Low 1.35 V DDR3L voltage reduces power draw and heat
- Dual rank 2Rx4 organisation maximises memory density per slot
- 240-pin RDIMM form factor fits standard DDR3L server boards
8GB DDR3L 1333 RDIMM
This 8GB DDR3L module runs at 1333 MHz with CL9 latency and 1.35 V operation. It uses a 2Rx4 registered ECC design on a 240-pin form factor and carries Supermicro certification with Hynix chips. The part number is MEM-DR380L-HL04-ER13.
Suited for servers needing registered ECC DDR3L
This module fits systems that require registered ECC DDR3L memory at 1333 MHz. It is not for platforms that only accept unbuffered non-ECC DIMMs, nor for boards that cannot run 1.35 V low-voltage modules. Buyers who need higher capacities per slot or different voltage levels should look elsewhere.
Supermicro MEM-DR380L-HL04-ER13 part number
The exact part number MEM-DR380L-HL04-ER13 determines whether this module matches your server's qualified-vendor list. Verify that your system documentation lists this specific Supermicro-certified part before ordering.
How it compares
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 98% of the 6,523 comparable items (median $188.99).
- Total capacity 8 GB
- Lower than about 80% of the 6,064 comparable items (median 32 GB).
- Price per GB $1.62 per GB
- Cheaper than about 95% of the 6,064 comparable items (median $7.25 per GB).
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | SuperMicro |
| Product line | Supermicro Certified |
| Model name | MEM-DR380L-HL04-ER13 |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Questions about this item
What is the CAS latency figure for this DDR3L 1333 module?
The module runs at CL9 latency, which is the standard timing for DDR3L 1333 (PC3L-10600) operation.
Does the registered design and 1.35 V voltage keep thermals low in a fully populated server chassis?
Registered buffering reduces electrical load on the memory controller, and the low 1.35 V DDR3L voltage cuts power draw and heat versus standard DDR3.
Which server platforms accept this 240-pin RDIMM without a BIOS update?
It is certified for Supermicro systems that list the MEM-DR380L-HL04-ER13 part number in their qualified vendor list.
More in ECC Server RAM
Similar items
Kingston Technology Corp. KSM48E40BD8KI-32HA 32GB DDR5 4800 CL40 ECC Unbuffered server RAM
- 32 GB
- DDR5 4800
Kingston Technology Corp. KSM56E46BD8KM-48HM 48GB DDR5-5600 CL46 ECC Unbuffered 2Rx8 288-pin server RAM
- 48 GB
- DDR5 5600
Simmtec, Inc 8GB DDR3-1600 ECC REG Server RAM for Dell PowerEdge R520
- 8 GB





