We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White USB 3.0 Micro-B cable, 3.3 ft long, matte finish

ABLEGRID

ABLEGRID White USB 3.0 Micro-B Cable 3.3 ft for Seagate SRD0SD1 PN 1DXAP4-500

SKU CH-CD5Q-KM1TW

White USB 3.0 Micro-B cable, 3.3 ft, 28 AWG data and 24 AWG power wires, supports up to 4.8 Gbps and works with USB 2.0 and 1.1 ports

  • Fast 4.8 Gbps data transfer with USB 3.0 Micro-B connector
  • Works with USB 2.0 and 1.1 ports for broad compatibility
  • 24 AWG power wire and 28 AWG data wire for reliable delivery
  • 3 ft white cable keeps desk tidy and flexible
  • CE, FCC and RoHS certified for safety and quality

Compatible USB 3.0 Micro-B Cable for Seagate SRD0SD1

This 3.3 ft white cable connects the Seagate SRD0SD1 backup drive to a host computer using a USB 3.0 Micro-B interface. It supports data transfer rates up to 4.8 Gbps and remains backwards compatible with USB 2.0 and USB 1.1 ports. The cable is built with 28 AWG data wires and 24 AWG power wires. It suits users needing a replacement or spare lead for this specific drive model.

Thermals Noise and Power Draw

As a passive copper cable it generates no audible noise and adds no measurable heat to the system during normal operation. Power delivery is handled by the host port and the drive enclosure, so the cable itself draws no independent power. The 24 AWG power conductors are rated for the current required by the attached USB 3.0 device. No active cooling or additional power supply is involved.

Build Quality and Daily Use

The cable carries CE, FCC and RoHS certifications and is described as 100% brand new and high quality. Its white PVC jacket and standard Micro-B connector fit the Seagate SRD0SD1 port without adapters. At 3.3 ft the length suits desktop setups where the drive sits close to the computer. Users requiring a longer reach or a right-angle connector will need a different cable.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 91% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameABLEGRID

Questions about this item

How do I plug the Micro-B end into the Seagate SRD0SD1 and what is the common mistake?

Insert the Micro-B connector straight into the drive's USB 3.0 port; the frequent error is forcing it upside-down, which bends the 28 AWG data wires inside the plug.

What part of this 3.3 ft cable will wear out first and need replacement?

The Micro-B plug sees the most stress from repeated insertion, so the gold-plated contacts and the 24 AWG power wires near the strain relief tend to fail before the Type-A end.

At what transfer rate does the cable hit its ceiling during a long backup to the 4 TB drive?

Sustained writes are capped at the USB 3.0 interface limit of 4.8 Gbps, and the 28 AWG data conductors add resistance that keeps real-world throughput at or below that figure.

More in AV Accessories & Components

Similar items