ABS R1015E-4545P rack server EPYC 4545P 16-core 3.00 GHz 64GB DDR5 2x 2TB

Edge server for space-constrained deployments

The ABS R1015E-4545P is a 1U rack system designed for edge workloads where depth is limited to 15 inches. It ships with an AMD EPYC 4545P 16-core processor running at 3.00 GHz and 64GB of DDR5 ECC UDIMM memory. Dual 1GbE ports and IPMI give remote administrators out-of-band control. The short chassis fits tight cabinets while still offering two 3.5-inch and two 2.5-inch drive bays.

Upgrade from single-socket towers or older 1U boxes

This platform replaces standalone tower servers that lack redundant power or remote management. The move is worthwhile when you need hot-swap 350W redundant supplies, IPMI, and a PCIe 5.0 x16 slot in a 1U form factor. Builders staying with a single socket but requiring ECC memory and dual LAN will benefit. Teams needing multi-socket scaling or GPU density beyond one full-height card should look elsewhere.

Memory and storage headroom for typical edge tasks

The board provides four DIMM slots populated with two 32GB modules, leaving room to reach 192GB total. Two 2TB M.2 SSDs are installed on a SATA interface with pass-through only; no hardware RAID is present. The single PCIe 5.0 x16 and x4 slots accommodate one accelerator or fast NIC. Workloads that exceed 192GB RAM, demand more than four drives, or require multiple double-width GPUs will outgrow this chassis.