Abus 55HB/40-63 KA keyed padlock alike

Brass padlock for traffic and parking areas

This Abus 55HB/40-63 KA padlock is built for traffic and parking lot applications. The solid brass body resists corrosion while the steel shackle provides cut resistance. Keyed-alike convenience lets one key open multiple locks across a site. It suits facility managers securing gates, barriers or equipment enclosures.

1/4 inch shackle diameter and 2 1/2 inch clearance

The shackle measures 1/4 inch thick with a 2 1/2 inch internal height and 13/16 inch internal width. These dimensions decide whether the lock fits your hasp, chain link or gate latch. Verify the opening size before ordering because the shackle cannot be swapped or shortened.

Simple snap-on installation with no rekeying

Push the shackle into the body until it clicks; the 4-pin tumbler cylinder is factory set and not rekeyable. Interchangeable cores are not supported so cylinders cannot be upgraded later. The long shackle clears thick hasps but may snag on tight clearances if the mounting point is recessed.