Acumen Disc AD63-USB USB Duplicator 1 to 63 33MB/s 128MB Buffer
- 1 to 63
- 128M
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Stand-alone duplicator copies one USB flash drive to 95 targets at up to 35 MB/s with 128 MB buffer and DoD-compliant erase modes
The Acumen Disc AD95-USB is a standalone USB flash drive duplicator that copies one source to 95 targets without a computer. It is built for IT departments, duplication services and secure facilities that need high-volume, on-site media replication. The unit operates independently, removing the host-PC bottleneck and reducing software attack surface.
Each of the 95 target slots sustains up to 35 MB/s, fed from 128 MB of onboard memory that decouples source reading from target writing. Asynchronous operation lets channels finish at different times, so slower drives do not hold back faster ones. The source port reads at 33 MB/s, setting the practical ceiling for any single master.
When a workflow demands dozens of identical USB sticks per shift, this unit removes the labor of sequential PC burns and the cost of multiple smaller towers. The jump is worth it when batch counts regularly exceed ten targets or when DoD-compliant sanitisation is required alongside duplication.
Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Acumen Disc |
| Model name | Acumen Disc USB |
| Part number | AD95-USB |
| Product type | USB Flash Drive Duplicator |
| Performance | |
| Transfer speed | 33 MB/s |
| Memory | |
| Buffer size | 128M |
| Storage | |
| Loading mechanism | Slot |
| Display | |
| Display type | 20 × 2 LCD |
| Ports & slots | |
| Connection | USB |
| Power | |
| Power supply | AC: 115-230 V, 50/60 Hz |
| Compatibility | |
| Supported media | USB Flash Memory Drive (Pen Drive only, not available for external USB connected devices) |
| Software | |
| Supported languages | English / Spanish / French / Japanese |
| More details | |
| Target range | 1 to 95 |
| Data source ROM | 1 USB Slot for Source Reading |
| Data destination burner | 95 USB Slots for USB to USB Copy |
| Operating mode | Standalone |
Other versions of this model
Yes, it supports USB‑IF compliant Type‑A drives from USB 1.0 through 3.0 and newer, so older 2.0 masters can be duplicated onto 3.0 targets at up to 35 MB/s per channel.
The 20×2 LCD shows real‑time status for each of the 95 slots; select Quick Copy to copy only data (33 MB/s sustained) or Full Copy for bit‑for‑bit duplication, and the display confirms pass/fail per port.
Only the duplicator, its AC power cord (115‑230 V, 50/60 Hz), and the 128 MB internal buffer are supplied; all source and target USB flash drives must be purchased separately.
More in Disc, USB & SD Duplicators
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?