Adafruit High Brightness Green EL Wire 2.5 m 2.6 mm ADA-407
Green electroluminescent wire glows aqua at 123 cd/m², draws 10 mA per metre, and lasts 3000 hours at 1.5 kHz/90 V
- Bright lime-green glow at 123 cd/m² with 1.5 kHz / 90 V drive
- Runs twice as bright as 2.3 mm standard EL wire
- Lasts 3000 hours to 50 % brightness
- Draws only 10 mA per metre of wire
- Pre-cut 2.5 m length with quick-connect soldered ends
High Brightness Green EL Wire 2.5 m
This electroluminescent wire glows aqua with a lime green coating when driven by an AC signal. It is 2.5 meters long and 2.6 mm thick, pre-cut and soldered to a standard quick-connect. The wire is very bendable, keeps its shape, and draws about 10 mA per meter at 1.5 kHz and 90 V.
Inverter drive capability check
The capacitance is about 11 nF per meter, roughly twice that of standard 2.3 mm EL wire. An inverter will drive only half as much of this high brightness wire as it would standard wire. Verify your inverter can handle the total length and capacitance before ordering.
Brightness and lifetime figures
Running at the rated voltage and frequency, the wire emits 123 cd/m². The half-life, defined as 50 % brightness reduction, occurs after 3000 hours of continuous use. These numbers let you plan runtime and replacement intervals for costumes, signs, or accent lighting.
How it compares
Measured against everything we stock in Passive Components & Solder Supplies, at today’s prices. Recalculated every night.
- Price $9.99
- Typical for this category: the median of 265 items is $9.99.
Specifications
| Product | |
|---|---|
| Brand name | Adafruit Industries |
| Model name | ADAID-407 |
| Part number | ADA-407 |
| Product type | Other |
Questions about this item
What is included with the 2.5 m EL wire and what else is needed to make it glow?
The 2.5 m length comes pre-cut and soldered to a standard quick-connect plug; an EL inverter that can supply 90 V at 1.5 kHz must be purchased separately.
How does the 2.6 mm high-brightness version differ from the 2.3 mm standard wire?
The 2.6 mm wire emits 123 cd/m² at 90 V — roughly twice the brightness — but its 11 nF/m capacitance means an inverter drives only half the length compared with standard 2.3 mm EL.
What does the 123 cd/m² figure mean once the wire is installed in a project?
At 90 V and 1.5 kHz the wire glows at 123 cd/m², drawing about 10 mA per metre, and will reach 50 % brightness reduction after 3000 hours of continuous use.
More in Passive Components & Solder Supplies
Similar items
SHURTAPE TECHNOLOGIES, INC. 100526 Red Painter's Tape 48 mm 55 m
- Capacitors
WUQ 525STID-PWD Plastic Transom Mount 600W 10 pin Multisensor passive component
Unique-Bargains 50W 6 Ohm Aluminium Chassis Mount Wirewound Resistor Glod 5pcs
- Plate Chassis Mount…





