We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic drive adapter with USB-A, USB-C, SATA and dual IDE ports plus power socket

Adiven

Adiven AD-STAIDE-1 2026 Hard Drive Reader USB 3.0 SATA IDE Adapter

SKU CH-7Q66-JZF87

Connects 2.5" and 3.5" SATA or IDE drives plus 5.25" optical drives via USB 3.0 or USB-C with a 12V/2A power adapter included

  • Size2.5 in & 3.5 in
  • Drive interfaceIDE / SATA
  • External connection2.5 in & 3.5 in
  • Bay count3
  • Product colorBlack
  • Product typeEnclosure
  • Reads SATA, IDE and 5.25" optical drives via USB 3.0
  • Transfers data at up to 5 Gbps with USB 2.0 fallback
  • Powers 3.5" drives with included 12V 2A adapter
  • Dual USB-A and USB-C cable fits any host port
  • Hot-swap capable for quick drive changes without reboot

Universal drive reader

The Adiven AD-STAIDE-1 connects SATA and IDE hard drives or optical drives to a computer through USB 3.0 and USB-C ports. It accepts 2.5 and 3.5 inch HDDs or SSDs, 2.5 and 3.5 inch IDE drives and 5.25 inch optical drives. The kit is intended for data recovery, backup or cloning tasks on Windows or Mac systems. No driver installation is required for basic operation.

Thermals and power

The unit draws power from the included 12V 2A adapter and a 4-pin cable when a 3.5 inch drive is attached. Smaller drives can run from the host port alone. The ABS housing passively dissipates heat without a fan, so the adapter adds no audible noise during normal use. Power consumption scales with the connected drive rather than the adapter itself.

Included accessories

A dual-head USB-A and USB-C cable lets the adapter plug into almost any modern or legacy port without a separate dongle. The 40-pin and 44-pin IDE connectors plus one SATA III connector allow three drives to be read simultaneously. The manual explains the jumper setting required for older IDE drives to appear correctly in disk management.

How it compares

Measured against everything we stock in External Drive Enclosures, at today’s prices. Recalculated every night.

Price $25.99
Cheaper than about 60% of the 821 comparable items (median $30.99).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameAdiven
Product line2026 Hard Drive Reader USB 3.0 to SATA IDE Adapter
Model nameIDE SATA to USB + Type C External Hard Drive Adapter Data Recovery Converter Kit
Part numberAD-STAIDE-1
Product colorBlack
Product typeEnclosure
Storage
Drive interfaceIDE / SATA
Bay count3
Ports & slots
External connection2.5 in & 3.5 in
Power
Power adapterYES
Size & build
Size2.5 in & 3.5 in
Main materialABS
In the box
In the boxHard driver readerx1, 4-pin power cablex1, 12 V/2A power adapterx1, USB C and USB 2-In-1 cablex1, manualx1

Questions about this item

How do I install a 3.5-inch IDE drive using the 40-pin connector and the 12V/2A power adapter?

Connect the 40-pin IDE cable to the drive, attach the 4-pin power cable from the 12V/2A adapter, set the drive jumper to slave, then plug the USB 3.0 or USB-C cable into the computer.

What maintenance will the 12V/2A power adapter and 4-pin cable need over time?

Inspect the 4-pin cable and power adapter for worn pins or cracked insulation; replace either piece if the drive fails to spin up or disconnects during transfers.

What limit appears first when reading three drives at once over USB 3.0?

The shared 5Gbps USB 3.0 bandwidth becomes the bottleneck when 2.5-inch, 3.5-inch and 5.25-inch drives operate simultaneously.

More in External Drive Enclosures

Similar items