AFRNDK VER0010s-PLUS PCI-E 16X riser kit 10pcs 60cm
A ten-piece kit of 60 cm PCI-E 16X risers with 8 solid capacitors, 6-pin power and USB 3.0 cables for multi-GPU mining rigs
- Stable GPU power delivery backed by eight solid capacitors
- Independent 12 V DC-DC supply with 6-pin connector reduces motherboard load
- Reliable contact ensured by original imported PCI-E 16X slot connector
- Signal integrity up to 3 m using multi-layer shielded USB 3.0 cable
- Flexible placement with soft, easy-to-route USB cable and secure slot buckle
10-piece PCI-E 16X riser kit
This kit contains ten PCI-E 16X riser cards, ten PCI-E 1X cards, ten power cables and ten USB 3.0 cables. Each riser uses a 60 cm shielded cable with eight solid capacitors and a 6-pin power connector. The design targets multi-GPU mining rigs that need flexible card placement.
6-pin power and shielded 60 cm cable
The 6-pin connector draws 12 V power directly from the PSU through an on-board DC-DC circuit, removing load from the motherboard. Multi-layer shielding allows the 60 cm cable to run without signal loss. A locking buckle on each 16X slot secures the graphics card during transport or vibration.
Suited for high-density mining builds
Builders running ten or more cards on a single board benefit from the independent power delivery and long, flexible routing. Operators who need shorter cables, different power connectors or a smaller quantity should look at alternative riser kits.
How it compares
Measured against everything we stock in ASIC Hardware & PCIe Risers, at today’s prices. Recalculated every night.
- Price $61.99
- Cheaper than about 95% of the 566 comparable items (median $792.99).
New to this? Buying an ASIC miner with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How many risers are included in the kit?
The kit contains ten PCI-E 16X cards, ten PCI-E 1X cards, ten power cords and ten USB 3.0 cables.
What is the length of each USB 3.0 cable?
Each cable is 60 cm long, allowing flexible placement of graphics cards inside the chassis.
Does the riser draw power from the motherboard or from a separate connector?
A 6-pin connector on the adapter card supplies 12 V power directly, so the motherboard is not loaded by the graphics cards.
More in ASIC Hardware & PCIe Risers
Similar items
SXDOOL 6IN1 Six-Fan Cooling Kit 12025 3-12V Controller Dual Ball Bearing
AAAwave The Sluice V.2 12 GPU Mining Frame with 4 Stacking Brackets White
- ATX Open Frame Chas…





