Tripp Lite PV400USB 400W power inverter 12V 120V 2 USB 2 outlet
- 2 × 5-15R
- 3 ft (0.91 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Delivers 300 W continuous pure sine wave output at 120 V from a 24 V battery with dual AC receptacles, load-based cooling and integrated cables
The AIMS PWRI30024S is a 300 W pure sine wave power inverter that converts 24 V DC input into 120 V AC output at 60 Hz. It provides 300 W continuous power with a 600 W surge capability and delivers a regulated waveform within +/- 3% for sensitive electronics.
This inverter suits off-grid or mobile setups running from a 24 V battery bank, accepting 20.4 V to 31 V DC input. It supports Flooded Lead Acid, GEL and AGM chemistries with adjustable multi-stage charging. It is not for systems built around a higher-voltage battery bank or installations that require more than 300 W of continuous output.
The defining specification is the 24 V DC nominal input with an operating window of 20.4 V to 31 V and a continuous output rating of 300 W. The unit includes dual AC receptacles, a load-controlled fan, DC cables with alligator clamps, a cigarette-lighter plug and an on/off switch. Full-load efficiency reaches 90% and the inverter shuts down automatically at 55 °C.
Measured against everything we stock in DC-to-AC Power Inverters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | AIMS |
The unit accepts 20.4–31 V DC input and draws up to 12.5 A at full load; use a 24 V battery bank and the supplied alligator-clamp cables rated for that current.
Connect the red clamp to positive and black to negative on a 24 V battery, plug loads into the dual 120 V AC receptacles, then press the on/off switch; the step most often missed is verifying correct polarity before powering on.
Keep the load-based fan vents clear of dust, check battery terminals for corrosion, and ensure the operating temperature stays between -15 °C and 55 °C to avoid automatic shutdown.
More in DC-to-AC Power Inverters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?