Brady 86339 Sign Base Aluminum hazardous location fixture
- Emergency Exit Sign…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Aleddra
Emergency LED T8 tube runs continuously and switches to a 420 lm battery backup for 90 minutes with automatic 30-second monthly and 90-minute annual self-tests
The Aleddra G3 Plus Emergency LED T8 is a 2-in-1 tube that operates as a standard T8 lamp on line voltage and switches automatically to its built-in battery during a power loss. It delivers more than 90 minutes of emergency illumination at 420lm. The double-end wired design bypasses the ballast and includes dual safety switches on both end caps for secure installation.
This lamp suits maintenance teams that must meet emergency-lighting audit requirements without manual monthly or annual checks. It runs a 30-second self-test every month and a 90-minute self-test once a year, flashing a warning indicator if battery capacity or another fault is detected. It is not for fixtures that are switched off regularly, because the battery only stays charged on an always-on circuit.
On battery power the tube provides 420lm for over 90 minutes, covering the minimum duration required by typical egress codes. The automatic monthly and annual self-tests verify that this runtime remains available. If the battery degrades below the threshold needed for the full period, the warning indicator alerts the team so the lamp can be replaced before the next inspection.
Measured against everything we stock in Emergency & Hazard Lighting, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | ALEDDRA |
It is double-end wired on line voltage with ballast bypass, so no external ballast is required.
Yes, it fits standard T8 sockets and runs directly on line voltage after bypassing the ballast.
The warning indicator flashes only when a fault is detected; no flash means the monthly 30-second and annual 90-minute self-tests passed.
More in Emergency & Hazard Lighting
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?