We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 10-port Gigabit PoE switch with two uplink ports

All-Tech

All-Tech 10 Port Gigabit PoE Switch 8×PoE+2 Uplink 120W

SKU CH-WJG6-E8YM3

A 10-port Gigabit switch with eight PoE+ ports, two uplinks and 120 W total power budget

  • 10-port Gigabit switch powers 8 PoE+ devices with 120 W total budget
  • Each PoE+ port delivers up to 30 W for cameras, APs or IP phones
  • Two dedicated 1000 Mbps uplink ports link to routers, NVRs or mesh systems
  • Built-in 120 W supply removes the need for an external power adapter
  • 4 kV lightning protection keeps connected gear stable during storms

10-Port Gigabit PoE Switch

The All-Tech switch provides eight PoE+ ports and two Gigabit uplink ports in a single unmanaged unit. It delivers up to 120 W total PoE power with a 30 W per-port limit for connected devices.

Silent Passive Cooling

A built-in 120 W power supply removes the need for an external adapter and enables fanless operation. The metal chassis dissipates heat quietly, while 4 kV lightning protection helps maintain stability during electrical surges.

VLAN Isolation and Plug-and-Play

A hardware DIP switch enables port isolation to separate traffic between downlink ports without software setup. The switch works immediately with PoE cameras, access points including Wifi 6 models, IP phones and other powered devices.

How it compares

Measured against everything we stock in Ethernet & PoE Switches, at today’s prices. Recalculated every night.

Price $70.99
Cheaper than about 85% of the 2,759 comparable items (median $482.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the All-Tech 10 Port Gigabit PoE Switch and which step is commonly missed?

Connect the built-in power supply to mains power, then plug devices into the eight PoE+ ports (up to 30W each) and use the two Gigabit uplink ports for the router or NVR; the step often missed is verifying total draw stays within the 120W budget.

What maintenance or replacement will this switch need over time?

The internal 120W power supply is the only field-replaceable component; the 4kV lightning protection is sacrificial and may require unit replacement after a major surge event.

What limit appears first when the switch runs continuously at full load?

The 120W total PoE budget is the first hard limit; once combined port draw reaches 120W the switch cannot supply more power even though individual ports support up to 30W.

More in Ethernet & PoE Switches

Similar items