Alpine SXE-1726S 6.5" Coax Speakers & PWE-S8 Powered Subwoofer
A 6.5" coaxial speaker pair rated at 40 W RMS plus an 8" powered subwoofer with 120 W output and a 3-inch depth
- Product typeAmplifier
- Premium 6.5" coaxial sound with 40 W RMS clarity
- 220 W peak power handles dynamic music passages effortlessly
- Wide 60 Hz – 20 kHz frequency range captures full detail
- Compact 8" powered sub adds 120 W of deep bass
- Shallow 3-inch depth fits tight vehicle spaces easily
Bundle Contents
This bundle pairs Alpine SXE-1726S 6.5" 2-way coaxial speakers with an Alpine PWE-S8 compact powered 8" subwoofer. The speakers handle 40 watts RMS and 220 watts peak at 4 ohms. The subwoofer delivers 120 watts from a quad-coil driver in a shallow enclosure. Together they cover a 60Hz-20kHz range for a full-system upgrade.
Installation Fit
The PWE-S8 measures just 3 inches deep, 13.5 inches wide, and 9 inches tall, allowing placement under seats or in tight cargo areas. Its cast metal chassis adds durability without demanding a large enclosure. The subwoofer accepts RCA and auto-sensing speaker-level inputs, so it connects to factory or aftermarket head units without extra converters. The coaxial speakers mount in standard 6.5" locations.
Tuning Controls
Side-panel access on the PWE-S8 provides phase, gain, low-pass crossover, and remote sub-level adjustments. These controls let the installer match bass output to the cabin and balance it with the coaxial pair. The built-in amplifier removes the need for a separate amp rack and wiring kit. The bundle therefore simplifies the signal chain while still offering precise bass shaping.
How it compares
Measured against everything we stock in Car Audio Amplifiers, at today’s prices. Recalculated every night.
- Price $311.99
- Pricier than about 62% of the 158 comparable items (median $225.49).
Specifications
| Product | |
|---|---|
| Product type | Amplifier |
Questions about this item
How much RMS power can the SXE-1726S speakers handle continuously?
The Alpine SXE-1726S 6.5" coaxial speakers are rated for 40 watts RMS each, which is the continuous power they can handle without thermal damage.
Does the PWE-S8 subwoofer run hot or draw a lot of current during long drives?
The PWE-S8 has a built-in 120-watt amplifier; its compact cast-metal chassis helps dissipate heat, and the auto-sensing inputs simplify wiring to reduce installation strain.
What head-unit connections are needed to install this bundle?
You need a source with either RCA pre-amp outputs or speaker-level outputs; the PWE-S8 accepts both via its side-panel inputs and includes gain, crossover and remote-level controls.
More in Car Audio Amplifiers
Similar items
Wet Sounds Front Battery 4 Amplifier Power Kit car amplifier
- Amplifiers





