ALTRONIX PD4UL PDU 4 Fuse 28 V AC DC 5.25 In
Distributes 28 V AC or DC power across four individually fused outputs on a 5.25 by 3.25 inch UL 294 recognised board
- Supply voltage28 V AC 28 V DC
- Voltage output28 V AC 28 V DC
- Product typePower Distribution Units
- Distributes 28 V AC or DC to four protected outputs
- Each output fused for independent fault isolation
- UL 294 recognised for access-control installations
- Compact 5.25 × 3.25 × 1.00 in phenolic board fits tight enclosures
- Phenolic or fibreglass construction resists heat and vibration
28 V AC/DC Power Distribution Unit
The ALTRONIX PD4UL is a 28 V AC/DC power distribution unit designed for access-control and security installations. It provides four independently fused output circuits from a single 28 V AC or DC input. The board measures 5.25 In long, 3.25 In wide and 1.00 In high and carries UL 294 recognition.
Installation notes and common issues
Mount the phenolic or fiberglass board inside a compatible enclosure using the existing holes. Connect the 28 V supply to the input terminals and wire each load to its own fused output. The most frequent error is exceeding the per-fuse current rating or mixing AC and DC loads on the same circuit.
Pre-order checklist
Verify that your system operates at 28 V AC or 28 V DC and that the total load stays within the fuse limits printed on the module. Confirm the enclosure can accommodate a 5.25 In by 3.25 In board with 1.00 In clearance. Ensure UL 294 compliance is required for the installation.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $24.99
- Cheaper than about 97% of the 643 comparable items (median $451.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ALTRONIX |
| Model name | PD4UL |
| Product type | Power Distribution Units |
| Power | |
| Supply voltage | 28 V AC 28 V DC |
| Voltage output | 28 V AC 28 V DC |
| Size & build | |
| Shipping weight | 0.23 kg |
| Package size | 152 × 102 × 25 mm |
Questions about this item
How can I verify the PD4UL is distributing power correctly after installation?
Measure 28 V AC or DC at each of the four fused outputs with a multimeter while the unit is powered.
What comes with the PD4UL and what must I source separately?
The board itself is supplied; you must provide the 28 V AC or DC source, output wiring and any enclosure.
Which PD4UL variant should I choose for a UL 294 compliant access-control system?
This single model is UL recognised to UL 294 and provides four fused outputs at 28 V AC or DC.
More in Rackmount PDUs
Similar items
CyberPower CPS1215RM 120V 15A Basic PDU 10 Outlets 15ft NEMA 5-15P 1U
- 1U
- 1U
Tripp Lite PDUMV20 Metered PDU 20A 28 Outlets 120V 15ft 0U Vertical
- 0U
- 120 V





