We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Anti-Seize

Anti-Seize 19217 Valve Stem Packing 7 ft PTFE

SKU CH-SE11-88PC3 MPN 19217

PTFE valve-stem packing rated to 500 °F and 500 psi, FDA-approved, 7 ft roll

  • Product typeDrain Components
  • Main materialPTFE
  • Product colorTransparent
  • FDA-approved PTFE packing suits food and pharma lines
  • Withstands -400 °F to 500 °F for extreme temperature stability
  • Handles 500 psi in pumps and valves for reliable sealing
  • Full 0–14 pH range resists harsh chemicals
  • Seven-foot spool provides ample length for multiple repairs

PTFE valve stem packing for high-temperature sealing

This PTFE valve stem packing handles continuous temperatures from minus four hundred to five hundred degrees Fahrenheit and pressures up to five hundred psi in both pumps and valves. The material resists the full zero-to-fourteen pH range and carries FDA approval for food-contact applications. Supplied as a seven-foot coil of seven thirty-second-inch square cross-section, it is cut to length during installation.

Industrial maintenance teams sealing aggressive

Maintenance crews working on steam lines, chemical pumps or food-grade valves will find the temperature, pressure and pH ratings cover most severe duties. Operations that require a rated shaft speed or a pre-formed ring rather than bulk coil should look at alternative sealing methods.

Seven-foot coil length determines coverage per

The seven-foot overall length is the single figure that decides how many valve stems or pump glands one pack can serve. Measure the total packing length required across all glands before ordering to avoid shortfalls.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $35.99
Typical for this category: the median of 4,240 items is $31.99.

Specifications

Product
Brand nameAnti-Seize
Model name19217
Product typeDrain Components
Product colorTransparent
Size & build
Main materialPTFE

Questions about this item

How often will the PTFE valve stem packing need replacement in a standard pump application?

The PTFE material resists chemicals across the full 0 to 14 pH range and handles temperatures from -400 to 500 degrees F, so replacement depends on your specific service conditions rather than a fixed interval.

What pressure limit will the packing reach first during continuous pump operation?

The packing is rated for a maximum of 500 psi in both pump and valve service, so that pressure ceiling is the primary limit under sustained use.

Does the packing generate noticeable heat or require extra cooling when run all day at the 500 psi rating?

PTFE packing itself produces minimal frictional heat; the 500 degree F temperature rating covers steam and ambient extremes, so no additional cooling is mandated by the packing design.

More in Drain Stoppers, Strainers & Traps

Similar items