Anti-Seize 28010 Joint Sealant Ribbon 3/8 in 25 ft
White PTFE joint-sealant ribbon, 25 ft long by 3/8 in wide, handles -450 °F to 600 °F and up to 3,000 psi for food, air and general thread sealing
- Product typeDrain Components
- Main materialHAWA
- Product colorWhite
- PTFE construction resists chemicals and extreme temperatures from -450 °F to 600 °F
- 25 ft roll provides ample length for multiple plumbing joints
- White HAWA material suits food-grade and compressed-air systems
- Handles up to 3,000 psi for both liquids and gases
- Linear density between .7 and .8 g/cc ensures consistent sealing performance
Joint Sealant Ribbon 3/8 in 25 ft
The Anti-Seize 28010 is a PTFE joint sealant tape designed for general-purpose thread sealing and specific food-grade applications. It also serves compressed-air systems and functions as a gasket-making tape across a wide service envelope. The ribbon measures three-eighths of an inch wide and twenty-five feet long.
Thermals noise and power
The tape operates continuously from minus four hundred fifty degrees Fahrenheit up to six hundred degrees Fahrenheit without degradation. It withstands liquid and gas pressures up to three thousand psi while maintaining a linear density between zero point seven and zero point eight grams per cubic centimetre. No power draw or acoustic signature is produced by this passive sealing material.
Upgrade path and fit
This ribbon replaces traditional pipe dopes, anaerobic sealants or lower-temperature PTFE tapes that cannot meet the same pressure or temperature extremes. The jump is worth it when an installation demands a single product approved for food contact, compressed air and cryogenic-to-high-heat service simultaneously. It does not suit buyers who need a pre-formed gasket of a specific flange geometry.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $51.99
- Pricier than about 63% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ANTI-SEIZE TECHNOLOGY |
| Product type | Drain Components |
| Product color | White |
| Size & build | |
| Main material | HAWA |
Questions about this item
How do I install the 3/8 in wide 25 ft joint sealant ribbon on threaded connections?
Clean threads thoroughly, then wrap the PTFE ribbon clockwise around male threads starting at the second thread, keeping tension even to avoid stretching the 0.7–0.8 g/cc density tape. Overlap each turn by half the ribbon width for full coverage.
What maintenance or replacement will this PTFE joint sealant ribbon need after installation?
The ribbon is a single-use consumable; it remains in the joint permanently. Inspect connections during routine system checks. If a joint is disassembled for any reason, remove all old tape and apply a fresh length.
What is the first limit reached under sustained high-temperature use of this sealant ribbon?
The maximum operating temperature is 600 °F. Continuous exposure at or above this limit will degrade the PTFE material before the 3,000 psi pressure rating becomes a factor.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 3126 08 00 Push-Fit Trap 8 mm 290 psi 176 °F Red
- Drain Components
- HAWA
Legris 3109 55 10 Push-Fit Elbow Fitting 3/16 in Tube 1/8 in MBSPT Black
- Drain Components
- Black





