Anti-Seize 46230 Thread Sealant Tape 1/2 in x 260 in
White PTFE thread-sealant tape, 1/2 in wide by 260 in long, rated to 10,000 psi liquid and 2,000 psi gas pressure from -400 °F to 550 °F
- Product colorWhite
- Seals threads reliably with general-purpose pipe tape
- Handles extreme cold down to -400°F operating temperature
- Withstands high heat up to 550°F maximum temperature
- Resists liquid pressure to 10,000 psi rating
- Dense PTFE construction between 1.2 and 1.5 g/cc
General-purpose pipe thread tape
This PTFE thread sealant tape is designed for general-purpose pipe sealing on metal and plastic fittings. It suits plumbers, maintenance technicians and DIY users who need a reliable joint seal on water, air or gas lines. The tape is rated for threads up to 1 1/2 in diameter.
Temperature and pressure performance
The tape operates continuously from -400 Degrees F to 550 Degrees F without degrading. It withstands liquid pressures up to 10,000 psi and gas pressures up to 2,000 psi. Linear density ranges between 1.2 and 1.5 g/cc for consistent fill and low permeation.
Dimensions and daily handling
Each roll measures 1/2 in wide by 260 in long, providing 21 ft of material per roll. The white colour makes coverage easy to inspect on threaded joints. It is not intended for oxygen service or for sealing non-threaded surfaces such as flanges or compression fittings.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $2.99
- Cheaper than about 96% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | ANTI-SEIZE TECHNOLOGY |
| Product color | White |
Questions about this item
How do I apply the 1/2 in wide POLY-TEMP XHD tape to threads up to 1 1/2 in diameter without gaps?
Wrap the tape clockwise around clean male threads with slight tension, overlapping each turn by half the 1/2 in width, and press firmly so the 1.2 to 1.5 g/cc density material fills the thread roots before assembly.
When should I replace the tape on a joint that sees repeated thermal cycling between -400 °F and 550 °F?
Replace the tape whenever the joint is broken or if visual inspection shows the white PTFE has thinned, shredded, or lost its ability to maintain a seal at up to 10,000 psi liquid or 2,000 psi gas pressure.
At what sustained pressure will the seal on a 1 1/2 in fitting reach its limit first?
The gas rating of 2,000 psi is the lower limit, so sustained gaseous pressure above that value will challenge the seal before the 10,000 psi liquid rating becomes a factor.
More in Drain Stoppers, Strainers & Traps
Similar items
Banjo
Banjo HB150-100 Barbed Hose Fitting 1-1/2" MNPT Trap
- Drain Components
- Black
$2.99
0.00003645BTC
In stock
Banjo
Banjo NIP050-3 1/2" MNPT x 3" TBE Polypropylene Pipe Nipple Sch 80
- Drain Components
- HAWA
$2.99
0.00003645BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017053BTC
In stock