We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cast iron reducing tee with three female NPT ports

Anvil

Anvil 0300039609 359 Class 125 Reducing Tee 1-1/4" x 1-1/4" x 1

SKU CH-99G0-DD0V9 MPN 0300039609

Cast iron Class 125 reducing tee connects 1-1/4" and 1" NPT female threads at 175 psi and 150°F

  • Product typeDrain Components
  • Main materialHAWA
  • Cast iron construction resists corrosion for long service life
  • Class 125 rating handles 175 psi at 150 °F operating conditions
  • Schedule 40 compatibility fits standard pipe dimensions
  • Female NPT threads on all three ports simplify installation

Anvil 359 Class 125 Reducing Tee for Drainage

This Anvil 359 Class 125 reducing tee connects three female NPT pipes in a drainage network. The cast iron body handles 175 psi at 150 degrees F and suits Schedule 40 piping. It fits residential and commercial waste lines where a 1-inch branch joins two 1-1/4-inch runs.

Straightforward NPT Threaded Installation

The three female NPT ports accept standard pipe threads without soldering or adhesives. Apply thread sealant rated for cast iron and tighten to specification to avoid cracking the brittle material. Misaligned pipes or over-torqued joints are the usual causes of leaks on this fitting.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $12.99
Cheaper than about 78% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameAnvil
Model name0300039609
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

How can I confirm the reducing tee is seated correctly after installation?

Check that all three NPT female threads engage fully without cross-threading, then pressure-test the joint up to 175 psi at temperatures not exceeding 150 °F to verify a leak-free seal.

What comes with the Anvil 0300039609 reducing tee and what must I supply?

The box contains only the Class 125 cast-iron tee with 1-1/4", 1-1/4" and 1" NPT female openings; you must provide Schedule 40 pipe, thread sealant or tape, and appropriate wrenches for assembly.

More in Drain Stoppers, Strainers & Traps

Similar items