Anvil 0300044401 Cast Iron Reducing Tee Class 125 trap
Cast iron reducing tee rated Class 125 for Schedule 40 piping handles 175 psi at 150 °F
- Product typeDrain Components
- Cast iron construction resists corrosion for long service life
- Class 125 rating handles 175 psi at 150 °F maximum operating pressure
- Schedule 40 compatibility fits standard piping systems
- Reducing tee design connects three NPT female ports in one fitting
- NPT female threads provide secure leak-resistant joints
What this fitting does
The Anvil 0300044401 is a cast iron reducing tee built for Schedule 40 piping systems. It connects a 1 1/2 inch female NPT branch to two 1 inch female NPT outlets in drainage and trap installations. The Class 125 rating confirms it meets standard pressure requirements for residential and light commercial plumbing work.
The spec that decides fit
This tee carries a maximum operating pressure of 175 psi at 150 degrees Fahrenheit. That single figure tells you whether the fitting matches your system design pressure and temperature. If your application exceeds either limit, this component is not suitable and a higher class fitting must be specified.
Capacity and headroom
The reducing tee handles the stated pressure and temperature range for typical drain, waste and vent runs. It runs out of headroom in high pressure hydronic loops, steam lines or any service above 175 psi or 150 degrees Fahrenheit. Buyers needing larger branch sizes or higher pressure classes must select a different fitting.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 65% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0300044401 |
| Product type | Drain Components |
Questions about this item
What does the 175 psi rating mean when the tee is installed in a working system?
It indicates the maximum operating pressure the cast iron reducing tee can handle at temperatures up to 150 degrees Fahrenheit.
How does the Class 125 designation relate to the NPT threads on this fitting?
Class 125 defines the pressure class for the cast iron body, while the female NPT threads provide the standard tapered pipe connection for Schedule 40 piping.
What pipe sizes and thread type are needed to connect this reducing tee?
It accepts 1 1/2 inch and 1 inch Schedule 40 pipe with female NPT threads on all three outlets.
More in Drain Stoppers, Strainers & Traps
Similar items
AzWzz Bathroom Sink Stopper Hair Catcher 12 Pack 1.1-1.65in Silver
- 2 × 2 × 2 in
- 2 × 2 × 2 in
$19.99
0.00024532BTC
In stock
