Anvil 0300052800 reducing tee trap 2 1/2 x 2 1/2 x 1 in
A reducing tee connects three pipes at 2½, 2½ and 1 inch with threaded black cast-iron construction rated to 175 psi WOG and 125 psi steam from -20 to 150 °F
- Product typeDrain Components
- Reduces pipe size from 2 1/2 to 1 inch for flexible plumbing design
- Black cast iron construction handles 175 psi WOG for reliable pressure containment
- UL Listed and FM Approved for fire protection system compliance
- ASME B16.4 certified threads ensure secure, leak-resistant connections
- Certified for potable water use in California and Vermont meeting health standards
Reducing tee for fire protection
This Anvil 0300052800 reducing tee connects three threaded pipe sections in fire protection systems. It fits 2 1/2 inch lines on the run and a 1 inch branch. Black cast iron construction meets ASME B16.4 and carries UL and FM approvals for inspected fire equipment lists. Suitable for potable water use in California and Vermont.
Class 125 pressure and temperature limits
The fitting is rated for 175 psi water, oil or gas at temperatures from -20 to 150 degrees F. Saturated steam service is limited to 125 psi. These boundaries define the practical envelope for any installation using this component.
Capacity for standard fire sprinkler branches
The 2 1/2 by 1 inch reduction handles typical sprinkler branch take-offs from a 2 1/2 inch main. It will not suit larger branch sizes or mains above the listed pressure and temperature ratings. Systems needing higher steam pressure or bigger branch connections require a different fitting.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $72.99
- Pricier than about 71% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0300052800 |
| Product type | Drain Components |
Questions about this item
Which pipe sizes does this reducing tee connect?
It joins two 2 1/2 inch NPT branches with a single 1 inch NPT branch, all threaded for direct assembly.
What does the 175 psi WOG rating mean once the tee is installed?
It guarantees the fitting will hold 175 psi water, oil or gas at temperatures between -20 °F and 150 °F without leakage.
What standard governs the thread form and pressure class of this fitting?
The tee follows ASME B16.4 Class 125 with NPT threads, so it mates with any Class 125 black cast-iron piping system.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3036 56 14 Push-Fit Adapter Fitting 1/4 in Brass 10
- Drain Components
- Black
$72.99
0.00088465BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016956BTC
In stock
Legris
Legris 3102 08 10 Push-Fit Elbow Fitting 8mm x 10mm
- Drain Components
- Black
$72.99
0.00088465BTC
In stock