Anvil 0300154002 trap eccentric reducer cast iron class 125 schedule 40 175 psi 150 degrees F
Cast iron eccentric reducer coupling rated 175 psi at 150 degrees F for Schedule 40 pipe
- Product typeDrain Components
- Main materialHAWA
- Cast iron construction handles 175 psi at 150 °F
- Class 125 rating suits Schedule 40 piping systems
- Eccentric design keeps pipe centres aligned for smooth flow
- Female NPT threads on both ends enable direct connection
- Anvil model 0300154002 built for drain and trap installations
Eccentric reducer coupling for drain systems
The Anvil 0300154002 is a cast iron eccentric reducer coupling rated Class 125 for Schedule 40 pipe. It connects a 1-1/2 inch female NPT port to a 3/4 inch female NPT port. The fitting handles a maximum operating pressure of 175 psi at 150 degrees F.
Suited for offset pipe connections in drainage
This coupling suits installers who need to join different pipe sizes while maintaining bottom alignment for drainage flow. It is not for systems requiring higher pressure ratings or different material compatibility.
Class 125 pressure rating at 150 degrees F
The Class 125 designation confirms a 175 psi maximum operating pressure at 150 degrees F. Verify that your system design stays within this pressure and temperature limit before installation.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $66.99
- Pricier than about 70% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0300154002 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
What size NPT pipe threads must the existing pipework have to accept this 1-1/2" x 3/4" eccentric reducer?
Both ends use female NPT threads; one side fits 1-1/2" Schedule 40 pipe and the other fits 3/4" Schedule 40 pipe.
Can this Class 125 cast iron coupling stay in a line that also contains older galvanised steel fittings?
Yes, the NPT threads are compatible with standard iron or steel pipe threads of the same nominal sizes.
After installation, how can I confirm the joint is holding its 175 psi rating at 150 degrees F?
Pressurise the system to the working pressure and inspect the threads for leaks; a dry joint at test pressure shows it is seated correctly.
More in Drain Stoppers, Strainers & Traps
Similar items
Anvil
Anvil 0318901006 Cap Trap 4" FNPT Malleable Iron Class 150
- Drain Components
$66.99
0.00082008BTC
In stock
