We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black malleable iron 45 degree street elbow with male and female NPT threads

Anvil

Anvil 0310027800 45° Street Elbow 1-1/4" Malleable Iron Trap

SKU CH-5NF8-X6E5Y MPN 0310027800

Malleable iron 45-degree street elbow connects 1-1/4" NPT pipe at Class 150 for Schedule 40 systems rated to 300 psi

  • Product typeDrain Components
  • Main materialHAWA
  • 45° street elbow redirects flow in tight spaces
  • Malleable iron construction resists cracking under stress
  • Class 150 rating handles 300 psi at 150 °F
  • Schedule 40 compatibility fits standard piping systems
  • NPT threads on both ends ensure leak-tight seal

Anvil 1-1/4" 45° Street Elbow

This Anvil street elbow is a malleable iron pipe fitting designed to change the direction of a piping run by forty-five degrees. It connects a one-and-a-quarter inch female NPT thread to a matching male NPT thread. The fitting meets Class 150 pressure ratings for Schedule 40 pipe. It is supplied new in a black finish.

Suits installers needing a forty-five-degree offset

Plumbers and pipefitters who require a forty-five-degree change in direction on one-and-a-quarter inch NPT piping will use this fitting. It is not intended for systems requiring a ninety-degree turn or a different thread standard. Installers needing other angles, sizes or pressure classes should select alternative fittings.

Rated for 300 psi at 150 °F

The single specification that determines suitability is the maximum operating pressure of three-hundred psi at one-hundred-fifty degrees Fahrenheit. This rating applies to the Class 150 malleable iron body when used with Schedule 40 pipe. Verify that your system pressure and temperature remain within this limit before installation.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 67% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameAnvil
Model name0310027800
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

Will the 1-1/4" NPT male and female threads on this 45° elbow connect directly to my existing Schedule 40 piping?

Yes, both ends are 1-1/4" NPT and rated for Schedule 40 pipe, so they thread onto standard fittings of the same size and schedule without adapters.

How can I verify the joint is sound after assembly?

Pressurise the system up to 300 psi at 150 °F and check for leaks; the Class 150 malleable iron body is designed to hold that pressure when threads are properly sealed.

Does the box include thread sealant or gaskets, or must I supply them?

Only the black malleable iron street elbow is supplied; pipe thread sealant or tape must be purchased separately.

More in Drain Stoppers, Strainers & Traps

Similar items