We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Malleable iron reducing tee with three female NPT ports

Anvil

Anvil 0310040209 Malleable Iron Reducing Tee Class 150 trap

SKU CH-RGF3-3HZKM MPN 0310040209

Malleable iron reducing tee rated Class 150 for Schedule 40 pipe with three female NPT ports

  • Product typeDrain Components
  • Main materialHAWA
  • Malleable iron construction handles 300 psi at 150 °F
  • Reducing tee connects 1 in, 1 in and 3/8 in NPT ports
  • Class 150 rating suits Schedule 40 piping systems
  • Female NPT threads on all three outlets simplify installation
  • New Anvil fitting ready for immediate plumbing use

Malleable Iron Reducing Tee Class 150

This Anvil 0310040209 reducing tee connects three female NPT pipes in a drain system. It is built from malleable iron rated for Class 150 service. The fitting joins two 1 inch lines with a 3/8 inch branch. It suits plumbers and maintenance crews working on Schedule 40 piping.

Straightforward NPT threaded installation

Thread each pipe end into the female NPT ports using appropriate sealant. The malleable iron body accepts standard pipe wrenches without damage. Over-tightening can crack the casting or strip threads, so stop when joints feel firm. Ensure the 3/8 inch branch aligns with the intended flow direction before final tightening.

Verify pipe schedule and pressure rating

Confirm your existing pipes are Schedule 40 with matching 1 inch and 3/8 inch NPT threads. The fitting handles 300 psi at 150 degrees F maximum operating pressure. Check that system pressure and temperature stay within this limit. Ensure the reducing configuration matches your layout before ordering.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 74% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameAnvil
Model name0310040209
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

How can I verify the reducing tee is sealing properly after installation?

Pressurise the system up to 300 psi at 150 °F and inspect each NPT joint for leaks; a tight, dry connection confirms the Class 150 fitting is working as intended.

What comes with the Anvil 0310040209 and what must I supply myself?

The box contains the malleable iron reducing tee with 1 in, 1 in and 3/8 in female NPT ends; you must provide Schedule 40 pipe, thread sealant and any required nipples or valves.

Which version of this reducing tee should I choose for a standard Schedule 40 system?

Select the Class 150 model rated for 300 psi at 150 °F — it matches Schedule 40 piping and the 1 in / 3/8 in NPT configuration shown in the specifications.

More in Drain Stoppers, Strainers & Traps

Similar items