Anvil 0310041207 Reducing Tee 1 x 1/2 x 1 FNPT
Malleable iron reducing tee connects 1 in., 1/2 in. and 1 in. FNPT pipes at 300 psi
- Product typeDrain Components
- Main materialHAWA
- Reduces pipe size with 1" x 1/2" x 1" FNPT connections
- Handles 300 psi at 150°F for demanding systems
- UL Listed and FM Approved for code compliance
- Meets ASME B 16.3 standard for malleable iron fittings
- Operates from -20°F to 150°F across varied conditions
Reducing Tee for Malleable Iron Piping
The Anvil 0310041207 reducing tee connects three pipe sections sized 1 inch, 1/2 inch, and 1 inch using FNPT threads. It is built from malleable iron rated for Class 150 service. Plumbers and maintenance technicians use it to create branch lines in water, air, or steam systems.
Sustained Pressure and Temperature Performance
The fitting withstands a maximum pressure of 300 psi at 150 degrees Fahrenheit and a saturated steam pressure of 150 psi. Its temperature range extends from -20 degrees to 150 degrees Fahrenheit. These limits apply to continuous operation rather than brief test spikes.
ASME B16.3 and Listing Constraints
The tee meets ASME B 16.3 dimensional and material standards and carries UL Listed and FM Approved markings. It is not intended for pressures above the Class 150 rating or for fluids outside the stated temperature range. Installers must verify compatibility with the specific piping schedule and media.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 86% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0310041207 |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
How much pressure can the 1" x 1/2" x 1" reducing tee handle when the system runs hot all day?
It is rated for 300 psi at 150 °F and 150 psi for saturated steam, with a temperature range of -20 °F to 150 °F.
What piping does the buyer need on hand so the FNPT connections on this tee seal properly?
Three lengths of pipe with male NPT threads — one 1-inch and two 1/2-inch — plus thread sealant or tape for each joint.
Will the malleable-iron body meet the same ASME B16.3 standard as the older Class 150 fittings already in the building?
Yes, the tee is UL Listed, FM Approved and manufactured to ASME B16.3, so it matches existing Class 150 malleable-iron piping.
More in Drain Stoppers, Strainers & Traps
Similar items
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00016972BTC
In stock