Anvil 0334531001 Trap 1 in MNPT x 4 in TBE Steel Sch 40
A 1-inch Schedule 40 steel pipe nipple with male NPT threads for air, gas, non-potable water, oil and steam at 150 psi
- Product typeDrain Components
- Schedule 40 steel nipple rated for 150 psi service
- Welded Grade B steel construction for durability
- 1 inch MNPT threaded end connects directly
- 4 inch overall length suits tight piping runs
- Black anodized finish resists corrosion in air gas oil steam
Galvanised steel pipe nipple
The Anvil 0334531001 is a Schedule 40 steel nipple with a 1 inch MNPT thread on one end and a 4 inch overall length. It is manufactured in the USA to Grade B specification with a black anodised finish. The welded construction suits air, gas, non-potable water, oil and steam lines.
Pressure rating and service limits
The fitting handles a maximum operating pressure of 150 psi at 150 degrees Fahrenheit. Its inside diameter measures 61/64 inch while the outside diameter is 1 5/16 inch. Schedule 40 wall thickness provides standard weight for general piping but is not rated for Schedule 80 service pressures.
Threaded male connection requirement
This nipple only fits systems that accept a 1 inch male NPT thread on the supply side. Installations needing a female thread, a different nominal size or a longer reach cannot use this part.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 78% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Anvil |
| Model name | 0334531001 |
| Product type | Drain Components |
Questions about this item
Will the 1 in MNPT threads on this Schedule 40 nipple mate with my existing Schedule 80 fittings?
Yes, the manufacturer highlights confirm fitting compatibility with Schedule 80, so the 1 in male NPT threads will engage your existing Schedule 80 components.
How can I verify the nipple is rated for my 150 psi steam line after installation?
The nipple carries a maximum operating pressure of 150 psi at 150 degrees F, matching your steam line rating; inspect the black anodized finish and welded construction for defects before pressurising.
Does the box include thread sealant or gaskets for the 1 in MNPT connections?
The supplied unit is the bare 4 in TBE steel nipple with 1 5/16 in outside diameter and 61/64 in inside diameter; sealant, tape or gaskets must be purchased separately.
More in Drain Stoppers, Strainers & Traps
Similar items
As Seen On TV
As Seen On TV DJAP0006 Pipe Blaster 30 psi drain trap
- ABS Plastic
- Green
$12.99
0.00015911BTC
In stock
Banjo
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
$13.99
0.00017136BTC
In stock