We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel socket-weld tee, three outlets, 2-inch pipe size

Anvil

Anvil 0362026205 Tee 2" Socket Weld Class 3000

SKU CH-BNT3-HV2BR

A forged-steel socket-weld tee rated to 3000 psi for 2-inch pipe, meeting ASME B 16.11

  • Forged steel construction handles 3000 psi service pressure
  • Socket weld connection creates a permanent leak-tight joint
  • Three-outlet tee splits flow in 2-inch piping systems
  • ASME B16.11 compliance confirms dimensional and material quality
  • Black finish protects forged steel from surface corrosion

Product Purpose

The Anvil 0362026205 Tee is a forged steel pipe fitting designed to join three sections of 2-inch pipe in high-pressure systems. It uses socket-weld connections and meets ASME B16.11 standards for Class 3000 service.

Who It Suits

This tee suits installers building 3000 psi piping networks that require a 2-inch socket-weld branch. It is not for buyers who need threaded or butt-weld ends, a different pressure class, or a pipe size other than 2 inches.

Capacity and Limits

The forged steel body handles a maximum pressure of 3000 psi with a 3-inch outside diameter and three connection holes. It runs out when system pressure exceeds the Class 3000 rating or when the piping specification calls for a larger or smaller nominal bore.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $38.99
Typical for this category: the median of 1,499 items is $39.99.

Specifications

Product
Brand nameANVIL
Product typeOther

Questions about this item

What pipe size and schedule must I already have to socket-weld this 2" Class 3000 tee?

You need 2-inch pipe with a schedule heavy enough for Class 3000 socket-weld service so the bore matches the tee's socket depth and pressure rating.

Can I join this forged-steel tee to older threaded or butt-weld fittings in the same run?

No — the socket-weld ends only accept plain-end pipe for fillet welding; threaded or butt-weld adapters would be required to connect dissimilar end types.

How do I verify the tee is holding its 3000 psi rating after installation?

Perform a hydrostatic test at the appropriate ASME B16.11 test pressure and inspect each fillet weld for leaks or cracks before placing the line in service.

More in Bath Accessories & Soap Dispensers

Similar items