We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel pipe clamp, plain finish, 13 3/4 inches long

Anvil

Anvil 0500093638 Pipe Clamp 8 In 13 3/4 In L Carbon Steel

SKU CH-2RBS-GV3SW MPN 0500093638

Carbon-steel pipe clamp supports eight-inch lines at up to 1,615 lb. at 650 °F and meets UL, FM and ANSI/MSS SP-69 standards

  • Product typeDrain Components
  • Main materialHAWA
  • Supports heavy pipe runs with 1615 lb capacity at 650 °F
  • Maintains strength at higher temperatures with 1440 lb rating at 750 °F
  • Carbon steel construction resists deformation under sustained loads
  • Meets UL, ULC, FM and Federal Specification A-A-1192A for code compliance
  • 13 3/4 inch length fits 8 inch pipe for secure suspension

Pipe Clamp Specifications

This Anvil pipe clamp fits 8-inch pipe and measures 13-3/4 inches in overall length. It is manufactured from carbon steel with a plain finish and uses a 3/4-inch thread size. The clamp is metal detectable and designed for suspending cold pipe lines or hot lines where no insulation is required.

Intended Use And Limitations

The clamp suits installers needing a standard hanger for 8-inch piping systems operating within listed temperature limits. It is not suitable for insulated hot lines or for pipe sizes other than 8 inches. Buyers requiring different load ratings or finishes should consider alternative models.

Load Rating By Temperature

Maximum load capacity is 1615 pounds at 650 degrees Fahrenheit and 1440 pounds at 750 degrees Fahrenheit. This temperature-dependent rating determines whether the clamp meets the structural demands of a specific piping installation.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $52.99
Pricier than about 63% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameAnvil
Model name0500093638
Product typeDrain Components
Size & build
Main materialHAWA

Questions about this item

Does the Anvil 0500093638 pipe clamp ship with any fasteners or gaskets, or must they be purchased separately?

The clamp is supplied as a single carbon-steel unit; bolts, nuts and any required gaskets are not included and must be sourced separately.

When should I select the 8-inch model versus a different pipe size?

Choose this model only when the outside diameter of the pipe to be supported measures exactly 8 inches; other sizes are offered for different pipe diameters.

What do the 1615 lb at 650 °F and 1440 lb at 750 °F load ratings mean for a real installation?

They are the maximum safe working loads for suspending non-insulated hot or cold pipe lines at those temperatures; exceeding either value risks clamp failure.

More in Drain Stoppers, Strainers & Traps

Similar items