We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Anvil carbon steel pipe clamp, hot-dip galvanized finish, 1-1/4 inch pipe size

Anvil

Anvil 0500345046 Pipe Clamp Trap 1-1/4 In 4-1/8 In 500 Lb 650 Deg F

SKU CH-0ZCV-SG54F MPN 0500345046

A carbon-steel pipe clamp rated for 500 lb at 650 Deg F, hot-dip galvanised and UL, ULC, FM approved to federal and MSS standards

  • Product typeDrain Components
  • Supports 500 lb load at 650 °F
  • Hot-dip galvanized carbon steel resists corrosion
  • Meets UL, ULC, FM and federal specs
  • Fits 1-1/4 in pipe with 4-1/8 in length
  • Metal detectable for safety compliance

Pipe Clamp for 1-1/4 Inch Pipe

The Anvil 0500345046 is a carbon steel pipe clamp sized for 1-1/4 inch pipe with a 4-1/8 inch length. It is designed for suspending cold pipe lines or hot lines where insulation is not required. The clamp carries a maximum load of 500 lb at 650 degrees F. It suits installers needing a medium-duty hanger for standard piping runs.

Thermals and load capacity

The carbon steel body with hot-dip galvanized finish handles continuous temperatures up to 650 degrees F while supporting 500 lb. No moving parts or insulation contact means silent operation and no additional power draw. The construction meets Federal Specification A-A-1192A Type 4 and WW-H-171-E Type 4 for reliable thermal performance.

500 lb at 650 degrees F rating

The decisive specification is the 500 lb maximum load at 650 degrees F, which determines suitability for high-temperature piping systems. Buyers who need a higher load rating or a clamp compatible with insulated lines cannot use this model. The UL, ULC and FM approvals confirm compliance for standard fire protection and plumbing installations.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 90% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameAnvil
Model name0500345046
Product typeDrain Components

Questions about this item

How do I install the 5/16-inch threaded rod into the clamp and what step is often missed?

Thread the 5/16-inch rod through both clamp ears and tighten the nuts evenly; the step often missed is confirming the pipe sits fully in the saddle before final torque.

Will the hot-dip galvanized carbon steel need recoating or replacement after high-temperature service?

The hot-dip galvanized finish is designed for 650 °F continuous exposure; inspect annually for zinc depletion and replace the clamp if the coating is worn through to bare steel.

At what load or temperature does the 500 lb rating at 650 °F become the limiting factor during sustained use?

The 500 lb maximum load at 650 °F is the design limit; exceeding either the load or the temperature reduces the safety margin defined by MSS SP-58 Type 4.

More in Drain Stoppers, Strainers & Traps

Similar items