We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron cross coupling with threaded ports

Anvil

Anvil 1107 galvanized malleable iron cross coupling 1/2 inch

SKU CH-2X0J-P76XX

Four-way galvanised malleable iron fitting joins 1/2 inch NPT pipes at 300 psi water, oil, gas and 150 psi saturated steam

  • Galvanized malleable iron resists corrosion in wet systems
  • Class 150 rating handles 300 psi water-oil-gas pressure at 150 Degrees F
  • FM Approved and UL Listed for code-compliant installations
  • Meets ASME 16.3 standard for dimensional accuracy
  • Operates from -20 to 350 Degrees F including 150 psi saturated steam

Galvanized Malleable Iron Cross

The Anvil 1107 is a four-way pipe fitting made from galvanized malleable iron for 1/2 inch FNPT connections. It meets ASTM A197 and ASME 16.3 standards and carries FM and UL listings. The component suits plumbing and piping systems requiring a Class 150 rated cross junction.

Sustained Pressure and Temperature Limits

Under continuous operation the fitting handles a maximum working pressure of 300 psi at 150 degrees F WOG. For saturated steam service it is rated to 150 psi at 350 degrees F. The approved temperature range spans from -20 degrees to 350 degrees F without derating.

Class 150 Threaded Interface Constraints

The FNPT threaded ends conform to the ASME 16.3 dimensional standard for Class 150 malleable iron fittings. This defines the practical pressure ceiling at 300 psi WOG and the steam limit at 150 psi. Systems exceeding these pressure or temperature boundaries require a higher class fitting.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $16.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameAnvil

Questions about this item

How hot can the Anvil 1107 cross coupling get before the galvanized malleable iron is stressed?

The fitting handles a temperature range from minus 20 up to 350 degrees Fahrenheit, with saturated steam rated at 150 psi at the upper limit.

What thread standard must my existing pipework match for this 1/2 inch cross to seal correctly?

It uses FNPT threads built to ASME 16.3, so the mating pipes need the same National Pipe Taper profile.

Will the Class 150 rating hold if I connect this cross to older steel pipe rated for lower pressure?

The cross is rated 300 psi WOG at 150 degrees Fahrenheit, exceeding the Class 150 baseline, but the joint strength will be limited by the weaker pipe.

More in Hose Fittings, Adapters & Clamps

Similar items