We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Anvil

Anvil 2-1/2" FNPT Galvanized Pipe Cap 319900767

SKU CH-0H5Q-V1S0W

Galvanised malleable iron cap with 2-1/2 in FNPT thread, rated 300 psi at 150 °F and FM approved to ASME B 16.3

  • Galvanised malleable iron resists corrosion
  • Class 150 rating handles 300 psi at 150 °F
  • FNPT threads seal without extra fittings
  • FM approved and UL listed for code compliance
  • Operates from -20 °F to 350 °F

2-1/2" FNPT Galvanized Pipe Cap

This Anvil pipe cap is a Class 150 fitting made from galvanized malleable iron to ASTM A197. It carries FM Approved and UL Listed marks and meets ASME B16.3. The cap seals a 2-1/2 inch female NPT thread on pipe or equipment.

Suits water, oil, gas and saturated steam lines

The fitting handles 300 psi at 150 degrees F WOG and 150 psi saturated steam at 350 degrees F across a -20 to 350 degrees F range. It is not for systems that exceed these pressure or temperature limits, nor for connections requiring a different thread standard or fitting class.

2-1/2 inch FNPT thread size

The single specification that decides fit is the 2-1/2 inch FNPT connection. Verify the mating pipe or component uses the same nominal size and thread type before ordering.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $40.99
Pricier than about 77% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameANVIL

Questions about this item

Will the 2-1/2 inch FNPT threads on this galvanized cap mate with my existing Class 150 malleable iron piping?

Yes, the cap follows ASME B 16.3 dimensions for Class 150 fittings, so the FNPT threads will engage standard 2-1/2 inch malleable iron pipe of the same class.

How can I verify the cap is sealing correctly once installed?

Pressurise the system up to 300 psi at 150 °F WOG or 150 psi saturated steam at 350 °F; no leakage at the threads confirms a proper seal.

Does the box include thread sealant or a gasket, or must I buy them separately?

The cap is supplied as a single galvanized malleable iron fitting; thread sealant or PTFE tape must be purchased separately.

More in Hose Fittings, Adapters & Clamps

Similar items