We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 45-degree street elbow, silver finish, 1-inch FNPT x MNPT threads

Anvil

Anvil 311027601 1" FNPT x MNPT Galvanized 45 Degree Street Elbow bathware

SKU CH-4AWQ-VS3SV

Connects 1-inch threaded pipe at a 45-degree angle with galvanized malleable iron rated for 300 psi at 150 degrees F

  • Product colorSilver
  • Product typePipes, Valves & Fittings
  • Galvanized coating resists corrosion in wet environments
  • 45-degree street elbow redirects flow in tight spaces
  • Class 150 rating handles 300 psi at 150 °F
  • Female-to-male NPT threads connect without extra couplings
  • Schedule 40 malleable iron construction withstands heavy use

Anvil 1" Galvanized Street Elbow

This Anvil fitting connects a 1 inch female NPT thread to a 1 inch male NPT thread at a 45 degree angle. It is made from malleable iron with a galvanized finish and rated for Class 150 service. The part suits plumbing systems that require a directional change in tight spaces.

Installing the 45 degree elbow

Apply thread sealant or tape to the male threads before engaging the female end. Tighten to the recommended turns past hand-tight to avoid cracking the malleable iron casting. Misaligned piping creates stress on the joint and is the most common cause of leaks.

Pressure and temperature limits

The elbow withstands 300 psi at 150 degrees F maximum operating pressure. This rating applies to sustained service conditions rather than momentary spikes. Galvanized coating resists corrosion in water supply lines but is not intended for continuous exposure to higher temperatures.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 78% of the 1,499 comparable items (median $39.99).

Specifications

Product
Brand nameANVIL
Product colorSilver
Product typePipes, Valves & Fittings

Questions about this item

How can I confirm the 45 degree street elbow is sealing correctly after installation?

Pressurise the line up to 300 psi at 150 °F and check the FNPT and MNPT threads for leaks; a dry joint indicates the galvanized malleable iron fitting is working as intended.

What comes with the Anvil 311027601 elbow and what must I supply?

The box contains the single 1 inch galvanized 45 degree street elbow; you must provide Schedule 40 pipe, thread sealant or tape, and any additional Class 150 fittings required for your layout.

Which version of this fitting should I choose for a Class 150, Schedule 40 system?

Select the 1 inch FNPT x MNPT galvanized 45 degree street elbow rated 300 psi at 150 °F; it matches Class 150 and Schedule 40 specifications exactly.

More in Bath Accessories & Soap Dispensers

Similar items