We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducing tee, silver finish, three NPT ports

Anvil

Anvil 311039408 Galvanized Reducing Tee

SKU CH-XC2H-N20RX

Galvanized malleable iron reducing tee with 3/4" x 1/4" x 3/4" NPT connections, rated 2000 psi at 150 °F

  • Product colorSilver
  • Product typePipes, Valves & Fittings
  • Galvanized malleable iron resists corrosion for long service life
  • Class 300 rating handles 2000 psi at 150 °F for demanding pressure systems
  • NPT threads on three ports allow direct pipe connection without adapters
  • ASTM A-197 and ASME 16.3 compliance ensures consistent material and dimensional quality
  • Operates from -20 °F to 150 °F covering typical water, oil and steam applications

Galvanized Reducing Tee for 3/4

This galvanized malleable iron reducing tee connects a 1/4 inch branch to a 3/4 inch run using female NPT threads. It is built to Class 300 standards for plumbing and industrial piping systems. The fitting suits installers who need a durable branch connection in water, oil or gas service.

Upgrade from lower class or black iron fittings

Replacing a Class 150 or ungalvanized tee with this Class 300 component raises the pressure ceiling to 2000 psi at 150 degrees F and adds corrosion resistance. The jump is worth it when the system operates near the higher pressure rating or when the environment demands the galvanized coating for longevity.

Sustained pressure and temperature performance

The tee holds its 2000 psi rating continuously at temperatures up to 150 degrees F and handles saturated steam at 300 psi. Malleable iron construction to ASTM A-197 and ASME B16.3 resists deformation under long-term mechanical stress and thermal cycling within the stated range.

How it compares

Measured against everything we stock in Bath Accessories & Soap Dispensers, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 80% of the 1,499 comparable items (median $39.99).

Specifications

Product
Brand nameANVIL
Product colorSilver
Product typePipes, Valves & Fittings

Questions about this item

What pipe sizes does the 3/4 In. x 1/4 In. x 3/4 In. reducing tee connect?

The fitting joins a 3/4 In. run with a 1/4 In. branch, all using NPT threads.

How do I install the NPT threads without leaking?

Apply PTFE tape or pipe dope to the male threads only, then tighten two turns past hand-tight; over-tightening cracks the malleable iron.

When should I replace the galvanized malleable iron tee?

Inspect for white zinc corrosion, rust stains, or seepage at the joints; replace if the 2000 psi rating can no longer be trusted.

More in Bath Accessories & Soap Dispensers

Similar items