We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron reducing tee with three female NPT ports

Anvil

Anvil 311045801 Galvanized Reducing Tee 1-1/2" x 1-1/2" x 3/4" FNPT

SKU CH-99BJ-BR31Q

Galvanized malleable iron reducing tee joins three NPT-threaded pipes with a 3/4-inch branch for Schedule 40 systems rated to 300 psi at 150 °F

  • Galvanized malleable iron resists corrosion
  • Class 150 rating suits 300 psi at 150 °F
  • Schedule 40 compatibility simplifies pipe matching
  • Three female NPT ports enable flexible branching

Anvil Galvanized Reducing Tee 311045801

This Anvil malleable iron tee joins three pipe sections in a reducing layout. The galvanised coating protects the fitting from corrosion in water or air lines. It carries a Class 150 rating and suits Schedule 40 pipe. Maximum operating pressure is 300 psi at 150 degrees Fahrenheit.

For plumbers needing a 1-1/2" to 3/4" NPT branch

Installers who require a straight coupling or a different reduction ratio will need another fitting. Systems running above the stated pressure or temperature limits must use a higher-rated component. The tee is not intended for welded or flanged pipe assemblies.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $21.99
Pricier than about 57% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameANVIL

Questions about this item

How do I verify the reducing tee is holding pressure correctly after installation?

Pressurize the system up to 300 psi at temperatures not exceeding 150 °F and check all three FNPT joints for leaks; the Class 150 malleable-iron body is rated for that maximum operating pressure.

What comes with the Anvil 311045801 tee and what must I supply?

The box contains only the galvanized reducing tee with 1-1/2″, 1-1/2″ and 3/4″ FNPT ends; you must provide Schedule 40 pipe, thread sealant or tape, and any nipples or valves required for your layout.

More in Hose Fittings, Adapters & Clamps

Similar items