We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel reducing tee with three threaded ports, 3/4 by 3/4 by 1/4 inch

Anvil

Anvil 361122708 Reducing Tee 3/4 x 3/4 x 1/4 Class 3000

SKU CH-W4ZY-TES1P

Black forged steel reducing tee connects 3/4 in, 3/4 in and 1/4 in FNPT branches for up to 2000 psi at 150 degrees F

  • Reduces flow from 3/4 in to 1/4 in branch
  • Withstands 2000 psi at 150 Degrees F
  • Rated for 300 psi saturated steam at 550 Degrees F
  • Forged steel construction meets ASME B16.11 and ASTM A106
  • FNPT threads seal to B1.20.1 standard

Anvil Class 3000 Reducing Tee

This Anvil forged-steel reducing tee joins three FNPT-threaded pipes at 3/4 in, 3/4 in and 1/4 in. It is built to ASME B 16.11 and ASTM A 106 standards for Class 3000 service. The fitting suits industrial, commercial and residential piping systems that require a branch connection.

Pressure and temperature headroom

Rated for 2000 psi at 150 °F and 300 psi saturated steam at 550 °F, with an operating range from -20 °F to 550 °F. It handles high-pressure water, oil, air and steam lines within these limits. The rating drops above 150 °F, so designers must derate for hotter service.

Installation fit and clearance

Female NPT threads on all three ports accept standard pipe nipples or valves without adapters. The compact forged body leaves more room in tight pipe runs than fabricated tees. Black finish is ready for paint or insulation where required.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $24.99
Pricier than about 61% of the 2,955 comparable items (median $17.99).

Specifications

Product
Brand nameANVIL

Questions about this item

Will the 3/4" FNPT outlets on this reducing tee accept my existing NPT pipe threads?

Yes, the fitting uses FNPT connection type per ASME B 16.11 and ASTM B 1.20.1, so standard NPT male threads will engage correctly.

How can I confirm the Class 3000 forged steel tee is holding pressure after installation?

Pressurise the system up to 2000 psi at 150 °F or 300 psi saturated steam at 550 °F and inspect the three FNPT joints for leaks; the material is rated for -20 °F to 550 °F.

Does the box include any sealant, gaskets or extra fittings for the 1/4" branch?

The package contains only the black forged steel reducing tee; thread sealant, nipples or additional couplings for the 1/4" FNPT branch must be purchased separately.

More in Hose Fittings, Adapters & Clamps

Similar items