We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel 45 degree elbow coupling with socket weld ends

Anvil

Anvil 362013807 1-1/2" Black Forged Steel 45 Degree Elbow coupling

SKU CH-JV0P-09CY5

A 1-1/2 inch black forged steel socket-weld elbow that turns pipe 45 degrees, rated to 1500 psi at 150 °F and 300 psi saturated steam at 550 °F per ASME B16.11 and ASTM A106

  • 45-degree turn routes pipe around obstacles
  • forged steel body handles 1500 psi at 150 °F
  • ASME B16.11 design meets pressure-piping code
  • Class 3000 rating suits high-pressure steam lines
  • socket-weld ends create leak-tight permanent joints

Anvil 1-1/2" 45° Elbow

The Anvil 362013807 is a black forged steel pipe elbow designed to change flow direction by 45 degrees in a 1-1/2 inch piping system. It meets ASME B 16.11 and ASTM A106 standards for pressure applications. The socket weld connection type requires welding for a permanent, leak-resistant joint suitable for industrial piping networks.

Class 3000 Forged Steel Build

Forged steel construction provides high mechanical strength for demanding service conditions. The fitting carries a maximum pressure rating of 1500 psi at 150 degrees F and a saturated steam rating of 300 psi at 550 degrees F. An operating temperature range from minus 20 to 550 degrees F allows use in both chilled water and high temperature steam lines.

Socket Weld Prep Required

Verify that your pipe schedule matches the Class 3000 socket dimensions before ordering. The joint requires a qualified welder and proper gap alignment to meet code. This elbow is not intended for threaded, flanged or compression connections. Confirm material compatibility with the fluid media in your system.

How it compares

Measured against everything we stock in Hose Fittings, Adapters & Clamps, at today’s prices. Recalculated every night.

Price $19.99
Typical for this category: the median of 2,955 items is $17.99.

Specifications

Product
Brand nameANVIL

Questions about this item

Does the socket-weld connection follow ASME B16.11 for a 1-1/2 inch fitting?

Yes, it is built to ASME B16.11 for 1-1/2 inch socket-weld pipe size.

What is the outside diameter that determines the space needed for this elbow?

The outside diameter is 2 3/8 inches, which sets the clearance for installation.

How do you install a socket-weld elbow and what is the common mistake?

Align the pipe in each socket, leave a small gap before the bottom, then fillet weld; the frequent error is bottoming the pipe out with no gap.

More in Hose Fittings, Adapters & Clamps

Similar items