APC AP8862 Metered PDU 20A 208V 3Ph 36x5-20R 0U

Metered 3-Phase PDU for Data Centers

The APC AP8862 is a metered rack power distribution unit built for data-center racks that need active energy monitoring and circuit protection. It delivers 5.76 kVA at 208 V three-phase input and provides 120 V output through thirty-six NEMA 5-20R receptacles. Network interfaces including Web, SNMP and Telnet allow remote access and integration with APC centralized management platforms. A temperature and humidity sensor port adds environmental visibility.

Upgrade from Basic Unmetered Strip

This unit replaces a basic power strip that offers no real-time load data or alarm thresholds. The jump is worth it when operators must prevent overloads, balance phases across racks or report actual power consumption for capacity planning. Metered input with user-defined alerts enables proactive load management before a breaker trips. Locking receptacles and ultra-low-profile breakers add physical security and density that simple strips lack.

Check Rack Space and Input Wiring

Verify the rack can accommodate a 70.50-inch vertical or horizontal zero-U mount with toolless hardware. Confirm the facility provides a 208 V three-phase source with a NEMA L21-20P plug and that the 6-foot cord reaches the panel. Ensure the 16 A derated continuous rating matches the planned load and that local codes accept cUL, FCC Part 15 Class A and UL 60950-1 certifications.