APC APDU11450SW PDU Switched 34.6kW 400V 63A 42 Outlet 21x C13/C15/C19/C21

Three-phase power for high-density racks

The APC NetShelter Rack PDU Advanced Gen 2 delivers 34.6 kW at 400 V or 43.5 kW at 415 V across 42 switched outlets. Each 4-in-1 outlet accepts C13, C15, C19 or C21 plugs, giving 21 C13/C15 and 21 C13/C15/C19/C21 combinations in a 2.2 in wide 0U vertical form factor. Remote on/off control and PDU-level metering let administrators manage power per outlet and receive overload alerts. The unit ships new with an IEC 60309 60 A 3P+N+PE input plug and a 9.84 ft cord.

Verify three-phase supply and outlet mix

Confirm the facility provides 400 V or 415 V three-phase power with a 63 A or 60 A service matching the IEC 60309 3P+N+PE connector. Ensure the rack can accommodate a 71.9 in tall vertical PDU and that the 2.2 in width fits the available 0U mounting space. Check that connected devices use IEC 60320 C13, C15, C19 or C21 plugs so they match the 42 colour-coded, breaker-labelled outlets. The PDU operates up to 60 C at full load, so verify rack airflow meets that temperature limit.

NMC3 and EcoStruxure IT integration

A hot-swappable NMC3 network management card provides web, SNMP and CLI access without powering down the PDU. Integration with EcoStruxure IT enables centralised monitoring, firmware updates and alerting across the infrastructure. The 9.84 ft input cord eases routing to the upstream power source, while the switched outlets and metering support remote reboot and capacity planning from the same management plane.