APC SBP10KRMT4U 19" Rack Mount 100A Maintenance Bypass Panel

Rack-Mount 100 A Maintenance Bypass Panel

The APC SBP10KRMT4U is a 19-inch rack-mountable maintenance bypass panel rated for 20 kVA load capacity. It enables service personnel to isolate a connected UPS for maintenance or replacement without interrupting power to critical loads. The unit accepts a hardwired 220 V AC input and delivers nominal output at 200 V AC and 208 V AC. It is designed for data-centre and network-room installations that require continuous uptime during UPS servicing.

Passive Power Distribution with 100 A Rating

The panel operates without active cooling, so it produces no fan noise and adds negligible heat to the rack environment. It supports 100 A line current per phase, 100 A input current per phase and 100 A total current draw per phase. Because the device is a passive bypass assembly, its power draw is limited to the minimal losses across the internal bus and switching contacts. The 21.77 kg weight and 673.1 mm depth should be accounted for in rack structural planning and cable-routing allowances.

Six Locking Receptacles and Mounting Hardware

The front panel provides three NEMA L6-20R and three NEMA L6-30R locking receptacles for secure equipment connections. Included in the package are rack-mounting brackets, an installation guide and a user manual to assist with integration into a standard 19-inch enclosure. The two-year limited warranty covers defects in materials and workmanship under normal use. Installations requiring receptacle types other than NEMA L6-20R or L6-30R will need separate adapters or a different bypass panel.