ApexMaker High Speed 3D Printer Resin 405nm Grey 1KG

Fast-Curing Grey Resin for High-Speed LCD Printers

This 405 nm photopolymer is formulated for ultra-fast exposure on 2K, 4K and 8K LCD, DLP and SLA machines. Its low viscosity cuts curing time dramatically, so makers producing large batches or oversized models finish jobs in a fraction of the usual cycle. The grey colour gives neutral contrast for detail inspection straight off the build plate.

405 nm Wavelength Compatibility

The single specification that decides fit is the 405 nm curing wavelength; the resin will only polymerise correctly on printers whose light source matches that figure. If your machine uses a different wavelength the material will not cure, regardless of brand or screen resolution. Always verify the printer’s light specification before purchasing.

One-Kilogram Bottle Capacity

One kilogram of liquid resin typically yields several hundred grams of finished parts, enough for multiple large prototypes or dozens of small miniatures before a refill is needed. Headroom runs out when print volume exceeds the bottle’s total mass or when ambient temperature drops far below room level, slowing flow and increasing exposure times.