Apollo 30LF03801PR 2 in Gate Valve Trap
Low-lead bronze gate valve with press connection rated for 200 psi water and steam service
- Product typeDrain Components
- Low-lead bronze construction meets Prop 65 awareness
- 200 psi pressure rating handles demanding water lines
- 338 Cv flow coefficient delivers high capacity
- Non-rising stem design saves installation space
- Press female connection speeds up joint assembly
Low-lead bronze gate valve for water systems
The Apollo 30LF03801PR is a 2-inch gate valve constructed from low-lead bronze for use with water media. It features a solid bronze wedge, bronze stem and bronze seat with an EPDM seal. The screw-in bonnet and non-rising stem provide a compact profile. Connections are female press on the inlet side.
Sustained pressure performance
Rated for a maximum operating pressure of 200 psi and a maximum steam pressure of 200 psi, the valve maintains its seal under continuous load. The coefficient of volume (Cv) is 338, indicating high flow capacity when fully open. Bronze construction resists corrosion from water exposure over extended service periods.
Press connection and regulatory limits
The female press connection requires compatible press tooling and tubing for installation; it does not use threaded or flanged ends. California Proposition 65 warnings apply because the bronze alloy contains chemicals identified by the state as causing cancer and reproductive harm. The valve is not restricted from sale in any listed state.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $223.99
- Pricier than about 86% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Apollo |
| Model name | 30LF03801PR |
| Product type | Drain Components |
Questions about this item
How much pressure can the 2 in gate valve handle during continuous water service?
The valve is rated for a maximum operating pressure of 200 psi with water, so it will hold that pressure all day without leaking.
What piping method and size are required to install this valve?
You need 2 in copper tubing and a compatible press tool to make the female press connections on the valve body.
Will the bronze body and EPDM seal resist corrosion if the existing system uses older bronze fittings?
Yes, the low-lead bronze body, bronze stem, bronze wedge and EPDM seal are all compatible with traditional bronze piping and will not introduce galvanic issues.
More in Drain Stoppers, Strainers & Traps
Similar items
Woodford Manufacturing Company 65P-12 Frostproof Wall Hydrant 12 in trap
- Drain Components
Lincoln 1387 Rotary Fuel Pump with 96 in Hose
- Drain Components
- Black
Red Hat EF8210G094 1/2 in Brass Solenoid Valve 120V AC
- Drain Components
- Brass





