Apollo 36ELF10301PR 1/2 In. Pressure Reducing Valve
A 1/2 in. press-connection valve that reduces incoming water pressure to an adjustable 15 to 75 psi range, factory set at 50 psi, with a 250 psi maximum working pressure and 180 °F temperature rating
- Product typeDrain Components
- Adjustable pressure range from 15 to 75 psi for flexible system control
- Factory preset at 50 psi for immediate balanced performance
- Low-lead bronze construction meets NSF/ANSI 61 and ASSE 1003 standards
- Press connection design simplifies installation on 1/2 in. piping
- Rated for 250 psi working pressure and 180°F maximum temperature
1/2 In. Pressure Reducing Valve
The Apollo 36ELF10301PR is a water pressure reducing valve built from low lead bronze with press connections. It suits residential and light commercial plumbing systems that require accurate pressure control at the point of entry. The valve carries NSF/ANSI 61, ASSE 1003 and CSA B356 certifications.
Installers needing adjustable 15 to 75 psi range
This valve fits systems where supply pressure reaches 250 psi and a 50 psi factory setting provides a reliable starting point. It is not for steam lines, high temperature service above 180 degrees Fahrenheit, or installations that demand a larger connection size than 1/2 inch.
Sustained pressure regulation at 250 psi max
Under continuous demand the bronze body and press ends maintain the set pressure without creep, while the adjustable spring holds the outlet between 15 and 75 psi. The 4-3/4 inch height and 5-1/2 inch length allow it to remain stable in tight mechanical rooms during prolonged flow.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $82.99
- Pricier than about 73% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Apollo |
| Model name | 36ELF10301PR |
| Product type | Drain Components |
Questions about this item
What pipe size and connection type must my plumbing have for this 1/2 In. press-connection valve?
The valve is built for 1/2 In. press connections on both inlet and outlet, so your supply lines must match that size and press-fit method.
Will the factory pressure setting of 50 psi work with my existing 250 PSI supply without adjustment?
Yes, the unit is rated for a maximum working pressure of 250 PSI and ships preset to 50 psi, which sits inside the adjustable 15 to 75 psi range.
How can I confirm the valve is regulating pressure correctly after installation?
Attach a gauge downstream; a steady reading at or near the 50 psi factory setting under flow indicates the valve is operating as intended.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris
Legris 3140 04 56 Push-Fit Wye Fitting 5/32 in x 1/4 in Brass
- Drain Components
- HAWA
$83.99
0.00103075BTC
In stock
