Apollo 36H20401 Water Pressure Reducing Valve 3/4 in FNPT Bronze 25-75 psi
Bronze water pressure reducing valve with 3/4 in FNPT connections, adjustable from 25 to 75 psi and factory set at 50 psi
- Product typeDrain Components
- Adjustable pressure range 25 to 75 psi suits varied plumbing needs
- Factory preset at 50 psi simplifies initial installation
- Bronze construction resists corrosion for long service life
- 3/4 inch FNPT connection fits standard piping directly
- Certified to ANSI A112.26.2, ASSE 1003, CSA B356, IAPMO standards
Pressure range and connections
This water pressure reducing valve handles inlet pressures up to 400 psi and delivers an adjustable outlet range of 25 to 75 psi. It is factory preset at 50 psi. The body is bronze with 3/4 inch FNPT connections and measures 4 inches long by 7 inches high. Maximum service temperature is 180 degrees F.
Installers needing code-approved pressure control
Plumbers and facility managers who must meet ANSI A112.26.2, ASSE 1003, CSA B356 or IAPMO requirements will find this valve compliant. It is not for systems that require a built-in strainer or for piping smaller than 3/4 inch.
Adjustable outlet pressure 25 to 75 psi
The outlet pressure adjustment range is the single specification that determines whether this valve matches the job. Verify the required downstream pressure falls within this span before specifying the part.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $96.99
- Pricier than about 76% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Apollo |
| Model name | 36H20401 |
| Product type | Drain Components |
Questions about this item
What is the adjustable pressure range of the Apollo 36H20401 reducing valve?
The valve adjusts from 25 to 75 psi and ships with a 50 psi preset, so the outlet pressure can be set anywhere within that range for residential or light-commercial supply lines.
What pipe size and connection type does the 36H20401 require for installation?
It uses a 3/4 in FNPT threaded inlet and outlet, so you need matching 3/4 in male NPT pipe threads or adapters to connect it to the supply line.
How is the valve oriented during installation, and what step is commonly missed?
Install the valve horizontally with the flow arrow pointing downstream; the step often missed is flushing the line before threading the valve on so debris does not foul the seat.
More in Drain Stoppers, Strainers & Traps
Similar items
Valterra 9201GR Gate Valve Class 125 2 In Slip Trap
- Drain Components
- HAWA
Apollo 70LF-207-01 1-1/2" Sweat Bronze Ball Valve Inline Trap
- Drain Components
- White
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
HAYWARD POOL PRODUCTS INC TC10150ST 1-1/2 in PVC Check Valve Trap
- Drain Components
- HAWA





