We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze swing check valve with press connections, lead-free construction

Apollo

Apollo 61YLF207T1PR 1-1/2" Press Lead Free Bronze Swing Check Valve

SKU CH-NMCA-ZKDNN MPN 61YLF207T1PR

A 1-1/2 inch lead-free bronze swing check valve with press connections that handles 56 gpm at 200 psi water pressure and operates between 33 and 180 degrees Fahrenheit

  • Product typeDrain Components
  • Lead-free bronze construction meets potable-water standards
  • Press-to-press connections install without solder or threading
  • Swing-check mechanism permits flow in one direction only
  • Rated for 200 psi water and 15 psi steam service
  • Operates from 33 to 180 °F with EPDM seals

1-1/2" Press Bronze Swing Check Valve

This Apollo 61YLF207T1PR valve uses a lead-free bronze body with an inline swing mechanism. It accepts press connections on both ends for 1-1/2 inch pipe. The design suits horizontal or vertical mounting in general-purpose plumbing systems.

Replaces threaded or soldered check valves

Press ends remove the need for threading tools or open-flame soldering during installation. The jump is worth it when faster, flame-free assembly outweighs the cost of press tooling and compatible fittings. It does not suit systems that require a higher cracking pressure than .5 psi.

Limited by press connection and pressure ratings

The press interface demands compatible pipe and a calibrated press tool; it cannot join to threaded, grooved or flanged pipe without adapters. Maximum water pressure is 200 psi and steam pressure is capped at 15 psi WSP. Operating temperature range is 33 to 180 degrees F.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $248.99
Pricier than about 87% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameApollo
Model name61YLF207T1PR
Product typeDrain Components

Questions about this item

What pipe size does the 1-1/2" press connection fit?

The valve uses a 1-1/2 inch press connection on both ends for direct copper tubing installation.

How do I install the press ends and which orientation is required?

Use a compatible press tool to crimp each end; the valve mounts horizontally or vertically per the 0.5 psi cracking pressure rating.

When should the EPDM seal or RPTFE seat be replaced?

Inspect seals if leakage appears or after prolonged exposure near the 180 °F temperature limit or 200 psi pressure rating.

More in Drain Stoppers, Strainers & Traps

Similar items