We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four pink thermal pads 100 x 100 mm 0.5 mm thick

ARCTIC COOLING

ARCTIC COOLING ACTPD00020A Thermal Pad 0.5 mm 100 x 100 mm 4 pack

SKU CH-JERM-1RS63

Four 100 x 100 mm pink pads at 0.5 mm thickness transfer heat at 1.2 W/mK and stay flexible from -40 to 150 °C

  • Thermal conductivity1.2 W/mK
  • Continuous-use temperature-40 to 150 °C
  • DetailsDimensions: 100 × 100 mm Thickness: 0.5 mm Hardness: 20 Shor
  • Key featuresAward Winning Price-Performance-Ratio In a review from Germa
  • 2 W/mK thermal conductivity moves heat from chips efficiently
  • 5 mm thickness fits slim gaps between surfaces
  • Pink silicone pads are non-conducting for safe handling
  • Pack of four 100 x 100 mm sheets covers multiple components
  • UL 94 V-0 rating confirms flame-retardant material

High-Performance Gap Filler

The ARCTIC COOLING ACTPD00020A thermal pad bridges uneven surfaces between components and heatsinks. Each pad measures 100 x 100 mm with a 0.5 mm thickness and 1.2 W/mK conductivity. The pack contains four pink pieces rated for long-term use from -40 to 150 C. Builders needing thinner or thicker gap-filling options cannot use this single thickness.

Non-Conductive Thermal Transfer

The silicone-based material carries a UL 94 V-0 flammability rating and 1 x 10^12 O-cm volume resistivity for electrical safety. At 20 Shore 00 hardness and 2.3 g/cm3 specific gravity, it compresses easily under mounting pressure without pumping out. A 3.9 dielectric constant at 1 MHz and 0.4 KN/m tear strength ensure stable insulation during repeated thermal cycles. Systems requiring higher conductivity pads for extreme overclocking will find this rating insufficient.

Reusable Installation Benefits

Non-stick surfaces allow removal and repositioning without residue or damage to sensitive processor chips. The pads require no curing time and stay flexible across the operating range. A 2018 PC Games Hardware review highlighted the flexibility and reusability as key value factors. Users expecting adhesive-backed pads or pre-cut shapes for specific GPU models must prepare their own cutting tools.

How it compares

Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.

Price $16.99
Pricier than about 67% of the 498 comparable items (median $12.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameARCTIC COOLING
Model nameACTPD00020A
Performance
Thermal conductivity1.2 W/mK
Environment & compliance
Continuous-use temperature-40 to 150 °C

Questions about this item

How do I install the 0.5 mm pink thermal pads without tearing them?

Peel the protective film, place the pad on the component, and press gently. The low 20 Shore 00 hardness makes it very soft, so avoid stretching or pulling during positioning.

Will these 100 x 100 mm pads need replacement after a few years of use?

The pads are reusable and non-drying. German magazine PC Games Hardware praised their long-term flexibility in 11/2018, so they typically last the lifetime of the hardware unless physically damaged.

At what temperature do the 1.2 W/mK pads start to degrade under continuous load?

The long-term operating range is -40 to 150 C. The UL 94 V-0 rating confirms the material self-extinguishes, so sustained heat up to 150 C will not cause degradation.

More in Thermal Paste

Similar items