We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact Intel CPU cooler with 100 mm PWM fan and pre-applied thermal paste

ARCTIC

ARCTIC Freezer 8i 2 in 1 accessory Intel LGA1851 LGA1700 100 mm PWM fan

SKU CH-21A6-66H9Q

Compact Intel LGA1851 and LGA1700 CPU cooler with a 100 mm PWM fan, hydrodynamic bearing and pre-applied MX-6 thermal compound

  • Ready for Intel LGA1851 and LGA1700 sockets
  • Contact frame spreads pressure for longer CPU life
  • Low-profile build fits compact cases and tall RAM
  • Hydrodynamic sleeve bearing keeps fan quiet at all speeds
  • Pre-applied MX-6 paste enables instant installation

Intel LGA1851 and LGA1700 compatibility

The ARCTIC Freezer 8i is a compact CPU cooler designed for Intel LGA1851 and LGA1700 sockets. It ships with only the Intel mounting hardware to reduce packaging waste. A 100 mm PWM fan with a hydrodynamic sleeve bearing provides quiet airflow. Pre-applied MX-6 thermal compound allows immediate installation without extra paste.

Check socket and case height before ordering

Verify that your motherboard uses an Intel LGA1851 or LGA1700 socket, as no AMD mounting hardware is included. Ensure the case has enough vertical clearance for the cooler’s low-profile design. Confirm that the motherboard CPU fan header supports PWM control for automatic speed regulation. High RAM modules should fit, but measure if using unusually tall kits.

Low-profile build with contact frame

The cooler uses a contact frame to distribute pressure evenly across the CPU heatspreader for consistent heat transfer. Its reduced height suits compact chassis and avoids interference with nearby components. The hydrodynamic sleeve bearing keeps fan noise low at varying speeds. MX-6 compound is already spread on the base, so the cooler is ready to mount straight from the box.

How it compares

Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.

Price $41.99
Cheaper than about 78% of the 7,473 comparable items (median $56.99).

New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What is included in the box and what must be purchased separately?

The box contains the Freezer 8i cooler with a 100 mm PWM fan, pre-applied MX-6 thermal compound, and mounting hardware for Intel LGA1851 and LGA1700 sockets. No additional parts are needed for those platforms.

Which socket version should I choose for my Intel processor?

The cooler supports both LGA1851 and LGA1700 out of the box; select the mounting kit that matches your motherboard socket.

What does the 100 mm PWM fan deliver in a real build?

The hydrodynamic sleeve bearing keeps the 100 mm PWM fan quiet at low speeds and under changing loads, while the compact height clears tall RAM and fits small cases.

More in 2-in-1 Device Accessories

Similar items