We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80 mm case fan with square frame and nine blades

ARCTIC

ARCTIC P8 Silent 80 mm case fan 1600 RPM black

SKU CH-ZGT3-D9YQY

An 80 mm case fan optimised for static pressure on heatsinks and radiators, spinning at 1600 RPM with 15.6 CFM airflow and 0.08 Sone noise

  • Optimised for static pressure, ideal for heatsinks and radiators
  • German-developed motor runs at just 0.08 Sone at 1600 RPM
  • High-quality German alloy bearing reduces friction for greater efficiency
  • Delivers 15.6 CFM (26.5 m³/h) airflow at 1600 RPM
  • 3-pin connector for straightforward motherboard control

Silent pressure-optimised 80 mm fan

The ARCTIC P8 Silent is an 80 mm case fan built for systems that need airflow through restrictive heatsinks or radiators. Its pressure-optimised blades deliver 15.6 CFM at 1600 RPM while the German-developed motor and alloy-bearing combination keep friction and noise to a minimum. This makes it a direct fit for compact chassis or CPU coolers where static pressure matters more than raw volume.

15.6 CFM at 1600 RPM with low noise

At full speed the fan moves 26.5 m³/h of air while producing only 0.08 Sone, a level that is barely audible in a quiet room. The pressure-optimised design maintains that airflow when resistance rises, so it continues to cool dense fin stacks where open-flow fans would stall. Headroom ends when the 3-pin header limits speed control to voltage regulation rather than PWM precision.

German motor runs virtually silent

The motor developed in Germany uses an enhanced bearing and specialised lubricant to cut mechanical noise at low speeds, leaving only a faint airflow whisper at 1600 RPM. Power draw stays modest on a standard 3-pin connection, and the fan spins down cleanly when the motherboard reduces voltage. No additional cables or adapters are required for typical case or heatsink mounting.

How it compares

Measured against everything we stock in Cable Locks & Laptop Extras, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 61% of the 8,808 comparable items (median $16.99).

Specifications

No published specifications for this item yet.

Questions about this item

Will the 80 mm size and 3-pin connector fit the fan header on my older motherboard?

The 80 mm frame matches standard 80 mm mounting holes and the 3-pin connector plugs directly into any 3-pin or 4-pin motherboard header, running at 1600 RPM with voltage control.

How can I confirm the fan is running at its rated 1600 RPM and staying near the 0.08 Sone noise level after installation?

Check the RPM reading in BIOS or a hardware-monitoring utility; it should show approximately 1600 RPM, and the sound should be barely audible at 0.08 Sone.

Does the box include mounting screws or a 3-pin to 4-pin adapter, or do I need to buy them separately?

The package contains the fan only; mounting screws and any pin adapters are not included and must be purchased separately if required.

More in Cable Locks & Laptop Extras

Similar items