ARENTI 10 Pack LCAPC Single Mode Fiber Quick Connector 0.9/2.0/3.0mm
Ten LC/APC quick connectors for 0.9/2.0/3.0 mm single-mode fibre with ceramic ferrules, sub-0.3 dB insertion loss and 55 dB return loss
- Quick termination with guide mechanism speeds up field installs
- Ceramic ferrule keeps insertion loss below .3 dB for clean signal
- Return loss exceeds 55 dB for strong back-reflection control
- Rated for 500 mating cycles without performance drop
- Ten LC/APC connectors cover 0.9 mm, 2.0 mm and 3.0 mm round cables
10-pack LC/APC single-mode quick connectors
This pack supplies ten LC/APC single-mode fiber quick connectors designed for field termination on 0.9 mm, 2.0 mm and 3.0 mm round fiber cables. Installers and network technicians can terminate links without polishing or epoxy, reducing on-site time for FTTH drops and patch-panel repairs.
Not for armored 3.0 mm cable
The supplier states these connectors are not suitable for 3.0 mm armored fiber optic cable, limiting use to standard round cables in the three listed diameters. The ceramic ferrule delivers insertion loss below 0.3 dB and return loss above 55 dB, meeting typical single-mode link budgets for short indoor runs.
Rated for 500 mating cycles
High repeatability is specified at more than 500 insertion and extraction cycles, so the connector withstands repeated patching in distribution frames or test environments. High-performance materials provide resistance to high temperature and mechanical shock, supporting durable installations.
How it compares
Measured against everything we stock in 2-in-1 Device Accessories, at today’s prices. Recalculated every night.
- Price $39.99
- Cheaper than about 82% of the 7,473 comparable items (median $56.99).
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
The pack contains 10 connectors — is that the only quantity available?
The listing describes a single 10-piece pack of LC/APC quick connectors.
What does the <0.3 dB insertion loss mean once the connector is installed?
It indicates very low signal attenuation, so the link budget is barely affected by each joint.
These use LC/APC ferrules — what performance ceiling does that polish type set?
The angled polish delivers >55 dB return loss, limiting back-reflection for sensitive single-mode systems.
More in 2-in-1 Device Accessories
Similar items
Comp Bind Technology Dust Cover for Epson WorkForce WF-2930/2950 14.8W 11.8D 8.6H 2 in 1 accessory
Microsoft GJ3-00001 Docking Station 2 in 1 Accessory
- Docking Station
- Full-Size
Microsoft QC7-00001 Surface Pro 4 Type Cover Black 2 in 1 accessory
- Keyboard Case
- Black





